{"product_id":"starrett-19575-welded-bandsaw-blade-128-in-14-tpi","title":"Starrett 19575 Welded Bandsaw Blade 128 in 14 Tpi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 19575 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for continuous contour cutting on metal-cutting and general fabrication bandsaws. The blade runs 128 inches (10 feet 8 inches) long and 0.75 inches wide, with a constant 14 TPI pitch and a 0.032-inch thickness. The raker tooth set and straight tooth form deliver consistent chip clearance and a predictable cut on a range of workpiece materials. Licensed tradespeople and experienced fabricators install this blade on stationary bandsaw equipment in shop and job-site environments.\u003c\/p\u003e\u003cp\u003eThe 19575 is suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood. Its constant pitch and straight rake angle make it a practical choice for general-purpose material removal rather than variable-pitch finishing work. The flexible back type allows the blade to run on standard wheel-driven bandsaw frames without excessive stress at the weld joint. Typical applications include structural steel fabrication shops, mechanical contractors cutting pipe and bar stock, and woodworking or composite-cutting operations requiring a single blade setup.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuratec SFB series carbon steel construction for both blade body and tooth material\u003c\/li\u003e\n\u003cli\u003eConstant 14 TPI pitch for consistent, repeatable cutting across supported materials\u003c\/li\u003e\n\u003cli\u003eRaker tooth set with straight tooth form for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eFlexible back type reduces fatigue stress at the weld during operation\u003c\/li\u003e\n\u003cli\u003eContour cutting capable for curved and irregular cut profiles\u003c\/li\u003e\n\u003cli\u003eCompatible with ferrous metal, non-ferrous metal, plastic, and plywood applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a welded-loop replacement blade for stationary bandsaws accepting a 128-inch blade length and 0.75-inch blade width. Verify wheel diameter, blade guide spacing, and tension capacity on the host saw before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBlade installation should be performed by a qualified technician following the bandsaw manufacturer's service procedures. Disconnect and lock out power to the saw before opening blade guards or handling the blade. Wear cut-resistant gloves when uncoiling or threading the blade. Confirm blade tension, tracking, and guide bearing clearance before returning the machine to service.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 128 inches (10 feet 8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.032 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 19575\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51541949677874,"sku":"19575","price":57.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_34b9ddca-0316-45bf-b64c-f1d0923ed812.jpg?v=1785888300","url":"https:\/\/voomisupply.com\/products\/starrett-19575-welded-bandsaw-blade-128-in-14-tpi","provider":"Voomi Supply","version":"1.0","type":"link"}