{"product_id":"starrett-16914-welded-bandsaw-blade-3-tpi-carbon-steel","title":"Starrett 16914 Welded Bandsaw Blade 3 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 16914 is a welded carbon steel bandsaw blade engineered for continuous-duty cutting in fabrication and production environments. Part of the Duratec SFB series, it measures 19 feet 6 inches in length and 0.5 inches in width, with a blade thickness of 0.025 inches. The hook tooth form with raker set and positive rake angle supports aggressive stock removal across ferrous metals, non-ferrous metals, plastics, and plywood. The constant 3 TPI pitch pattern delivers consistent chip load and predictable cut quality. A flexible back type reduces fatigue cracking on tight-radius contour cuts. Licensed metalworking shops, woodworking facilities, and maintenance shops install this blade on vertical or horizontal bandsaws sized to accept a 19 foot 6 inch loop.\u003c\/p\u003e\u003cp\u003eThe 16914 is suited for contour cutting applications where a single blade must handle varied materials in a production or job-shop setting. The 3 TPI constant pitch makes it a practical choice for thicker cross-sections of ferrous and non-ferrous stock as well as structural plastics and plywood sheet goods. The Duratec SFB series targets general-purpose bandsaw use where carbon steel hardness and a welded loop construction are preferred over bi-metal options for cost-cycle reasons. Fabricators and millwrights installing this blade should confirm their bandsaw accepts a 0.5 inch wide blade in the 19 foot 6 inch loop length before ordering.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuratec SFB series carbon steel construction — both blade body and tooth material are carbon steel\u003c\/li\u003e\n\u003cli\u003eHook tooth form with positive rake angle for aggressive, efficient chip removal\u003c\/li\u003e\n\u003cli\u003eRaker tooth set for straight, balanced cuts in contour and straight-line applications\u003c\/li\u003e\n\u003cli\u003eConstant 3 TPI pitch for predictable feed rates across ferrous metal, non-ferrous metal, plastic, and plywood\u003c\/li\u003e\n\u003cli\u003eFlexible back type reduces stress cracking during contour and radius cutting\u003c\/li\u003e\n\u003cli\u003eWelded loop construction — 19 feet 6 inches overall length ready to install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a replacement or spare welded bandsaw blade for vertical and horizontal bandsaws configured to accept a 0.5 inch wide blade in a 19 foot 6 inch loop length. Verify wheel diameter, blade guide spacing, and blade width capacity on the specific saw before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBandsaw blade installation should be performed by a qualified technician following the saw manufacturer's tension and tracking specifications. Disconnect and lock out power to the saw before removing the old blade or installing a new one. Wear cut-resistant gloves when handling the coiled or looped blade. After installation, verify blade tracking and tension at low speed before returning the machine to production use.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 19 feet 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 16914\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51541426864434,"sku":"16914","price":63.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_09d1031e-0566-4af6-8570-e82a9c357522.jpg?v=1785875819","url":"https:\/\/voomisupply.com\/products\/starrett-16914-welded-bandsaw-blade-3-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}