{"product_id":"starrett-16698-welded-bandsaw-blade-10-tpi-carbon-steel","title":"Starrett 16698 Welded Bandsaw Blade 10 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 16698 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for continuous cutting on stationary band saw machines. Measuring 98 inches in length and 0.75 inches wide with a 0.032 inch thickness, this blade runs a constant 10 teeth per inch (TPI) pitch with a straight rake angle and raker tooth set. The flexible back type allows consistent tracking and reduces blade fatigue during extended cuts. It is suited for metal fabrication shops, woodworking operations, and general trade use where reliable contour and straight cutting is required across a range of materials.\u003c\/p\u003e\u003cp\u003eThis blade is built for contour cutting applications in both light industrial and shop environments. The carbon steel construction on both blade body and teeth handles ferrous metal, non-ferrous metal, plastic, and plywood. The constant pitch pattern delivers uniform chip load and predictable surface finish across all supported materials. Installers and shop technicians in fabrication, HVAC duct work, electrical conduit shops, and plumbing prefab environments will find this blade fits standard band saw machines that accept a 98 inch blade.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuratec SFB series carbon steel blade with flexible back for reduced fatigue and consistent tracking\u003c\/li\u003e\n\u003cli\u003eConstant 10 TPI pitch pattern for uniform chip load and smooth cuts\u003c\/li\u003e\n\u003cli\u003eRaker tooth set with straight rake angle optimized for contour cutting\u003c\/li\u003e\n\u003cli\u003eCompatible with ferrous metal, non-ferrous metal, plastic, and plywood applications\u003c\/li\u003e\n\u003cli\u003eWelded construction for a continuous loop with no mechanical joint\u003c\/li\u003e\n\u003cli\u003e0.032 inch blade thickness provides a balance of rigidity and flex on standard band saw wheels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit welded bandsaw blade for stationary band saw machines requiring a 98 inch blade length and 0.75 inch blade width. Specific machine compatibility should be verified against the machine manufacturer's blade specification before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBand saw blade replacement should be performed by a qualified technician familiar with the machine's blade tensioning and tracking system. Disconnect and lock out electrical power to the saw before removing the old blade or installing the new one. Follow the machine manufacturer's tensioning specifications and verify blade tracking before operating under load. Wear cut-resistant gloves when handling the blade, as the toothed edge presents a laceration hazard.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 98 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.032 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 7.83 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 16698\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51540362428722,"sku":"16698","price":41.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_d397b7cc-8d29-4e81-8453-d34f7b39178b.jpg?v=1785853367","url":"https:\/\/voomisupply.com\/products\/starrett-16698-welded-bandsaw-blade-10-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}