{"product_id":"starrett-16388-welded-bandsaw-blade-14-tpi-bi-metal-m42","title":"Starrett 16388 Welded Bandsaw Blade 14 Tpi Bi-metal M42","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe STARRETT 16388 is a welded bi-metal bandsaw blade engineered for continuous cutting of ferrous and non-ferrous metals. At 124 inches (10 feet 4 inches) long and 0.5 inches wide with a 0.035-inch thickness, this blade is built for metal-cutting bandsaws in shop and fabrication environments. The M42 high speed steel tooth construction delivers durability under high heat and chip load. A 14 TPI constant-pitch configuration and positive rake angle combine to produce smooth, consistent cuts at a controlled feed rate. Raker tooth set promotes efficient chip clearance, reducing heat buildup during extended cuts.\u003c\/p\u003e\n\u003cp\u003eThe 16388 is suited for production shops, metalworking facilities, and maintenance operations where consistent metal section cutting is required. The constant pitch and straight tooth form make it a reliable choice for cutting solid bar stock, structural shapes, pipe, and tubing from both ferrous and non-ferrous materials. The flexible back type allows the blade to track cleanly on standard metal-cutting bandsaw wheels without excessive fatigue stress at the weld joint. This blade is handled and installed by machinists, fabricators, and maintenance technicians.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 high speed steel teeth for extended cutting life in tough ferrous alloys\u003c\/li\u003e\n  \u003cli\u003e14 TPI constant pitch for smooth, consistent cuts in solid and structural stock\u003c\/li\u003e\n  \u003cli\u003eRaker tooth set promotes efficient chip evacuation and reduced heat\u003c\/li\u003e\n  \u003cli\u003ePositive rake angle improves cutting aggression and feed efficiency\u003c\/li\u003e\n  \u003cli\u003eFlexible back construction minimizes weld fatigue during blade flex\u003c\/li\u003e\n  \u003cli\u003eToothed cutting edge supports contour as well as straight cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or aftermarket blade for metal-cutting bandsaws accepting a 124-inch (10 feet 4 inches) loop length and 0.5-inch blade width. Suitable for cutting ferrous metal and non-ferrous metal workpieces.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBlade installation should be performed by a qualified machinist or fabricator with the bandsaw fully powered off and disconnected from its power source before any blade change. Verify blade tracking and tension adjustment per the bandsaw manufacturer specifications before resuming operation. Wear cut-resistant gloves when handling the blade loop, as tooth edges are sharp. Confirm wheel diameter and blade guide spacing are compatible with a 0.5-inch wide blade before installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 124 inches (10 feet 4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Intenss\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 16388\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51541784690994,"sku":"16388","price":108.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ba126aeca18f78e046eb323bf66af914_8e0e0d4e-9198-443d-af8c-fdd2ddced994.jpg?v=1785884844","url":"https:\/\/voomisupply.com\/products\/starrett-16388-welded-bandsaw-blade-14-tpi-bi-metal-m42","provider":"Voomi Supply","version":"1.0","type":"link"}