{"product_id":"starrett-16097-welded-bandsaw-blade-2-tpi-carbon-steel","title":"Starrett 16097 Welded Bandsaw Blade 2 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 16097 is a welded bandsaw blade from the Duratec SFB series, designed for continuous-loop cutting on stationary band saws in trade and industrial settings. It measures 13 feet 2 inches long, 1 inch wide, and 0.035 inches thick, with a 2 TPI constant-pitch hook tooth configuration and raker set. The carbon steel construction on both blade body and tooth material gives it a flexible back that resists fatigue during extended cutting cycles. Licensed contractors, fabricators, and maintenance technicians install this blade on horizontal and vertical band saws where consistent tooth geometry is required for clean, repeatable cuts.\u003c\/p\u003e\u003cp\u003eThis blade is suited for contour cutting applications across a range of materials including ferrous metal, non-ferrous metal, plastic, and plywood. The positive rake angle on the hook tooth form promotes aggressive chip clearance and reduces heat buildup during cuts. It fits industrial and commercial band saw setups where a 13-foot 2-inch loop length is specified. The constant pitch pattern makes it a practical choice for production environments where material type and thickness remain relatively consistent across runs.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuratec SFB series carbon steel blade body and tooth material for durability and flexible back performance\u003c\/li\u003e\n\u003cli\u003e2 TPI constant-pitch hook tooth form with positive rake angle for aggressive, efficient cutting\u003c\/li\u003e\n\u003cli\u003eRaker tooth set provides balanced chip evacuation across ferrous metal, non-ferrous metal, plastic, and plywood\u003c\/li\u003e\n\u003cli\u003eFlexible back construction reduces blade fatigue and extends service life in continuous-loop operation\u003c\/li\u003e\n\u003cli\u003eWelded loop construction in a 13-foot 2-inch length ready for direct installation\u003c\/li\u003e\n\u003cli\u003eContour cutting capable for curved and irregular workpiece profiles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit bandsaw blade for stationary band saws requiring a 13-foot 2-inch loop, 1-inch blade width, and 0.035-inch blade thickness.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBand saw blade installation and tensioning should be performed by a qualified technician familiar with the specific saw manufacturer's tensioning specifications. Always power down and lock out the band saw before removing the old blade or installing a new one. Use appropriate blade-handling gloves, as tooth edges are sharp along the full loop length. Verify blade tracking and guide alignment after installation before resuming cuts.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 13 feet 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 20.56 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 16097\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51538401263922,"sku":"16097","price":64.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_f3ea458f-06f4-4caa-87d6-98d31d80df5c.jpg?v=1785824562","url":"https:\/\/voomisupply.com\/products\/starrett-16097-welded-bandsaw-blade-2-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}