{"product_id":"starrett-15593-welded-bandsaw-blade-6-tpi-carbon-steel","title":"Starrett 15593 Welded Bandsaw Blade 6 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe STARRETT 15593 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for contour cutting on stationary band saw machines. The blade measures 7 feet 5 inches in total length, 0.5 inches wide, and 0.025 inches thick, with a constant 6 teeth-per-inch pitch and a raker tooth set for balanced chip clearance. The straight tooth form and flexible back type make it well-suited for curved and contour cuts through a range of workpiece materials. This is a shop-ready, pre-welded blade that mounts directly to compatible band saw wheels without field welding or splicing.\u003c\/p\u003e\n\u003cp\u003eThe 15593 is intended for use in industrial and trade shop environments where operators are cutting ferrous metal, non-ferrous metal, plastic, and plywood. The 6 TPI constant pitch provides a good balance of cut speed and surface finish across these materials. The raker tooth set distributes cutting load evenly, which helps extend blade life in production and service-shop use. Typical installation settings include metal fabrication shops, HVAC service shops cutting duct hardware, plumbing contractors cutting pipe, and general trade contractors using floor-standing band saws.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e7 feet 5 inches pre-welded blade length, ready to install on compatible band saws\u003c\/li\u003e\n  \u003cli\u003e0.5 inches wide with 0.025 inches blade thickness for flexible back operation\u003c\/li\u003e\n  \u003cli\u003e6 TPI constant pitch for consistent chip load across cut stroke\u003c\/li\u003e\n  \u003cli\u003eRaker tooth set reduces cutting force and improves chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCarbon steel blade and tooth construction from the Duratec SFB series\u003c\/li\u003e\n  \u003cli\u003eRated for contour cutting in ferrous metal, non-ferrous metal, plastic, and plywood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for stationary band saw machines that accept a 7 feet 5 inch welded blade with a 0.5 inch blade width. Suitable for cutting ferrous metal, non-ferrous metal, plastic, and plywood as stated by the manufacturer.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified operator or machinist. Disconnect and lock out power to the band saw before removing the existing blade or mounting a new one. Follow the band saw manufacturer's blade tensioning and tracking procedures before resuming operation. Blade guards must be reinstalled and adjusted to the workpiece height before cutting begins.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 7 feet 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.67 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 15593\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51539362513202,"sku":"15593","price":36.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_7abeb81c-89d6-434b-bbc7-55b198b9ba6e.jpg?v=1785838804","url":"https:\/\/voomisupply.com\/products\/starrett-15593-welded-bandsaw-blade-6-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}