{"product_id":"starrett-14076-welded-bandsaw-blade-14-tpi-carbon-steel","title":"Starrett 14076 Welded Bandsaw Blade 14 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 14076 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for contour cutting on stationary band saw machines. It measures 10 feet in length and 1\/2 inch in width, with a blade thickness of 0.025 inches and a constant-pitch tooth pattern at 14 teeth per inch. The straight tooth form combined with a raker tooth set delivers consistent chip clearance across a range of materials. The flexible back type allows the blade to run smoothly on standard two-wheel band saw configurations. Installation and replacement is handled by machine operators, maintenance technicians, and fabrication shop personnel.\u003c\/p\u003e\u003cp\u003eThe STARRETT 14076 is suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood. The 14 TPI constant pitch makes it effective for medium-thickness stock where a balance of cut speed and surface finish is needed. The raker tooth set handles interrupted cuts and varied cross-sections without excessive vibration. This blade is a practical choice for general fabrication, light metalworking, and production cutting environments where consistent blade geometry is required across repeated cuts.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e10-foot welded loop length ready to mount on compatible band saw machines\u003c\/li\u003e\n\u003cli\u003e14 TPI constant-pitch tooth pattern for consistent cut rate on medium-thickness stock\u003c\/li\u003e\n\u003cli\u003eRaker tooth set for effective chip clearance on ferrous and non-ferrous metals\u003c\/li\u003e\n\u003cli\u003eCarbon steel blade and tooth material rated for ferrous metal, non-ferrous metal, plastic, and plywood\u003c\/li\u003e\n\u003cli\u003eFlexible back type reduces fatigue cracking during continuous operation\u003c\/li\u003e\n\u003cli\u003eStraight tooth rake angle supports clean entry cuts with minimal burr on common shop materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit welded bandsaw blade for stationary two-wheel band saw machines accepting a 10-foot by 1\/2-inch blade. Confirmed material applications include ferrous metal, non-ferrous metal, plastic, and plywood.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBand saw blade replacement should be performed with the machine fully de-energized and the power disconnect locked out before opening blade guards. Wear cut-resistant gloves when handling the coiled blade. Verify blade tension and tracking per the saw manufacturer specifications before resuming operation. Blade changes on stationary band saws are typically performed by machine operators or maintenance technicians following standard shop safety procedures.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14076\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51538920538418,"sku":"14076","price":39.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_64624954-2d6c-4a05-a96b-188485d2a8eb.jpg?v=1785829680","url":"https:\/\/voomisupply.com\/products\/starrett-14076-welded-bandsaw-blade-14-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}