{"product_id":"starrett-14073-welded-bandsaw-blade-8-ft-14-tpi-carbon-steel","title":"Starrett 14073 Welded Bandsaw Blade 8 Ft 14 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe STARRETT 14073 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for contour cutting applications on a wide range of materials. At 8 feet long and 1\/2 inch wide with a 0.025-inch thickness, this blade mounts on stationary vertical or horizontal bandsaws common in fabrication and shop environments. The 14 teeth-per-inch constant pitch pattern delivers smooth, consistent cuts, while the raker tooth set controls chip removal during the cut. The straight tooth form and flexible back type make this a dependable general-purpose blade for both ferrous and non-ferrous work.\u003c\/p\u003e\n\u003cp\u003eThis blade is suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood, covering the range of materials encountered in metalworking shops, millwork operations, and general fabrication. The Duratec SFB series targets production and maintenance applications where a reliable, single-use or short-run blade is needed without the overhead of bi-metal tooling. It is typically installed by machinists, fabricators, or maintenance technicians working with bench or floor-model bandsaw equipment.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e8-foot welded blade ready to install with no field joining required\u003c\/li\u003e\n  \u003cli\u003e14 TPI constant pitch for smooth cuts across varied material thicknesses\u003c\/li\u003e\n  \u003cli\u003eRaker tooth set for efficient chip clearance during metal and plastic cutting\u003c\/li\u003e\n  \u003cli\u003eCarbon steel blade and tooth material suited for general-purpose cutting loads\u003c\/li\u003e\n  \u003cli\u003eFlexible back type allows the blade to track consistently around bandsaw wheels\u003c\/li\u003e\n  \u003cli\u003eContour cutting capable for curved or irregular profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose welded replacement bandsaw blade for stationary bandsaws accepting an 8-foot blade length and 1\/2-inch blade width.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBandsaw blade installation should be performed by a qualified technician with the machine fully powered down and locked out per OSHA lockout\/tagout procedures. Verify wheel diameter and blade guide clearances match the 1\/2-inch blade width before mounting. Tension and track the blade according to the saw manufacturer specifications before resuming operation. Wear cut-resistant gloves when handling the blade to prevent injury from the toothed edge.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 8 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14073\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51542890873138,"sku":"14073","price":35.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_d2329532-800e-4216-8088-0b419ca42ea1.jpg?v=1785910079","url":"https:\/\/voomisupply.com\/products\/starrett-14073-welded-bandsaw-blade-8-ft-14-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}