{"product_id":"starrett-14067-welded-bandsaw-blade-14-tpi-carbon-steel","title":"Starrett 14067 Welded Bandsaw Blade 14 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 14067 is a welded bandsaw blade from the Duratec SFB series, designed for continuous-loop cutting on vertical or horizontal band saws. The blade measures 89 inches long and 0.5 inches wide, with a 0.025-inch thickness and a constant-pitch 14 TPI tooth configuration. Tooth set is raker style with a straight rake angle and straight tooth form, ground from carbon steel on both the blade body and cutting edge. A flexible back type supports operation on variable-speed bandsaw units in shop and field environments. Licensed HVAC techs, plumbers, and general trade professionals use this blade for cutting ferrous metal, non-ferrous metal, plastic, and plywood in fabrication and service work.\u003c\/p\u003e\u003cp\u003eThe 14067 is suited for contour cutting applications where a consistent tooth pitch delivers predictable chip load across a range of materials. The 14 TPI count makes it a practical choice for thin-wall ferrous tubing, non-ferrous conduit, plastic pipe, and sheet stock. It fits standard consumer and professional-grade band saw frames that accept a 89-inch blade loop with a 0.5-inch blade width. Installers working in HVAC, plumbing, and electrical trades commonly use this blade for rough-in cutting of ductwork, pipe, and conduit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eConstant-pitch 14 TPI for consistent chip load across ferrous metal, non-ferrous metal, plastic, and plywood\u003c\/li\u003e\n\u003cli\u003eRaker tooth set with straight rake angle for balanced chip clearance\u003c\/li\u003e\n\u003cli\u003eCarbon steel blade body and tooth material for general-purpose shop cutting\u003c\/li\u003e\n\u003cli\u003eFlexible back type supports contour cutting and curved-path cuts\u003c\/li\u003e\n\u003cli\u003eWelded construction forms a continuous loop — no blade joining required at installation\u003c\/li\u003e\n\u003cli\u003eDuratec SFB series designation indicates standard flexible back geometry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned to fit band saw frames that accept an 89-inch blade loop with a 0.5-inch width and up to 0.025-inch blade thickness. Suitable for cutting ferrous metal, non-ferrous metal, plastic, and plywood as stated by the manufacturer.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBand saw blade replacement should be performed by a qualified technician with the saw unplugged or locked out per OSHA lockout\/tagout procedures before opening the blade guards. Verify wheel diameter, blade guide clearance, and blade tension specifications on the saw frame before installing. Weld integrity should be visually inspected prior to tensioning. Wear cut-resistant gloves when handling coiled or looped bandsaw blades.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 89 inches (7 feet 5 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.55 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14067\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51542280503602,"sku":"14067","price":37.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_0d0ea82d-bc7b-45a6-b030-c370240e943c.jpg?v=1785897211","url":"https:\/\/voomisupply.com\/products\/starrett-14067-welded-bandsaw-blade-14-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}