{"product_id":"starrett-14044-welded-bandsaw-blade-6-tpi-carbon-steel","title":"Starrett 14044 Welded Bandsaw Blade 6 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe STARRETT 14044 is a welded bandsaw blade from the Duratec SFB series, designed for contour cutting applications across a range of materials. The blade measures 12 feet 6 inches in length and 0.375 inches (3\/8 inch) in width, with a thickness of 0.025 inches. It runs at 6 teeth per inch with a constant pitch and a raker tooth set, providing consistent chip clearance during cuts. Both the blade body and tooth material are carbon steel with a flexible back, making it well suited for use on standard bandsaw equipment in trade and shop environments. Licensed tradespeople and experienced shop technicians are the primary installers and operators of this blade.\u003c\/p\u003e\n\u003cp\u003eThe STARRETT 14044 is intended for cutting ferrous metals, non-ferrous metals, plastic, and plywood. Its straight tooth form and raker set pattern make it a practical choice for general-purpose contour cutting where a constant pitch blade is appropriate. The flexible back construction allows the blade to track reliably on bandsaw wheels across a variety of cutting tasks in both production and maintenance shop settings.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDuratec SFB series construction with a flexible carbon steel back\u003c\/li\u003e\n  \u003cli\u003e6 TPI constant pitch for consistent, repeatable cutting performance\u003c\/li\u003e\n  \u003cli\u003eRaker tooth set with straight tooth form for effective chip clearance\u003c\/li\u003e\n  \u003cli\u003eRated for ferrous metal, non-ferrous metal, plastic, and plywood applications\u003c\/li\u003e\n  \u003cli\u003eWelded blade loop at 12 feet 6 inches eliminates blade-joining steps at installation\u003c\/li\u003e\n  \u003cli\u003e0.025 inch blade thickness suited for standard bandsaw wheel clearances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a replacement or spare welded bandsaw blade for bandsaws accepting a 12 foot 6 inch loop, 3\/8 inch wide, 0.025 inch thick blade. Confirm wheel spacing, guide clearance, and blade tracking specifications on the host bandsaw before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBandsaw blade replacement should be performed by a qualified technician following the bandsaw manufacturer's service procedures. Disconnect and lock out electrical power to the saw before removing or installing any blade. Verify blade tension, tracking alignment, and guide bearing clearance after installation before returning the saw to service. Wear cut-resistant gloves when handling the blade loop.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 12 feet 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 4.92 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14044\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51542632300850,"sku":"14044","price":40.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_e2e31a43-8ce7-46f2-82b3-8e5b1c7b9326.jpg?v=1785904007","url":"https:\/\/voomisupply.com\/products\/starrett-14044-welded-bandsaw-blade-6-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}