{"product_id":"starrett-10782-welded-bandsaw-blade-10-tpi-carbon-steel","title":"Starrett 10782 Welded Bandsaw Blade 10 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 10782 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for continuous-loop installation on standard bandsaw machines. The blade measures 12 feet 1 inch in length, 0.75 inches wide, and 0.032 inches thick. It runs a constant 10 TPI pitch with a raker tooth set and straight tooth form, delivering consistent chip clearance across a range of materials. The flexible back type reduces blade fatigue during curved and contour cuts, making it a reliable choice for production and shop environments where cut quality and blade life matter.\u003c\/p\u003e\u003cp\u003eThis blade is suited for contour cutting applications in both residential shop and light commercial settings. The carbon steel construction with straight tooth rake handles a broad material range including ferrous metal, non-ferrous metal, plastic, and plywood. It is well matched to horizontal and vertical bandsaw machines that accept a 12-foot 1-inch loop. Fabricators, machinists, pipefitters, and general shop technicians are the primary installers.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuratec SFB series carbon steel blade for ferrous metal, non-ferrous metal, plastic, and plywood\u003c\/li\u003e\n\u003cli\u003eConstant 10 TPI pitch for smooth, consistent chip load across cuts\u003c\/li\u003e\n\u003cli\u003eRaker tooth set promotes efficient chip evacuation and reduced heat buildup\u003c\/li\u003e\n\u003cli\u003eFlexible back type designed to withstand the stress of contour and radius cutting\u003c\/li\u003e\n\u003cli\u003e0.032-inch blade thickness balances rigidity and flex for accurate tracking\u003c\/li\u003e\n\u003cli\u003eFactory-welded loop ready for direct installation — no field joining required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit bandsaw blade for machines accepting a 12-foot 1-inch welded loop blade, 0.75 inches wide, at 0.032 inches thick. Suitable for ferrous metal, non-ferrous metal, plastic, and plywood cutting applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBandsaw blade installation should be performed by a qualified technician following the machine manufacturer's service procedures. Disconnect and lock out power to the bandsaw before removing the old blade or installing the new loop. Verify correct blade tension, tracking alignment, and guide bearing clearance before resuming operation. Always wear cut-resistant gloves when handling coiled or loop blades.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 12 feet 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.032 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.4 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10782\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51539484475698,"sku":"10782","price":62.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_d3de875d-0e96-462b-9f77-43a0fc20b96c.jpg?v=1785841358","url":"https:\/\/voomisupply.com\/products\/starrett-10782-welded-bandsaw-blade-10-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}