{"product_id":"starrett-10715-welded-bandsaw-blade-8-tpi-carbon-steel","title":"Starrett 10715 Welded Bandsaw Blade 8 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 10715 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for continuous cutting operations on metal-cutting and general-purpose bandsaws. The blade measures 11 feet 6 inches in length and 0.75 inches wide, with a thickness of 0.032 inches. It runs at a constant pitch of 8 teeth per inch with a raker tooth set and straight tooth form, delivering consistent chip removal across a range of materials. At 1.4 pounds, it is a standard-weight blade suited for horizontal and vertical bandsaw configurations. Installation is performed by licensed machinists, maintenance techs, and fabricators working in shop or field environments.\u003c\/p\u003e\u003cp\u003eThe 10715 is rated for contour cutting and is appropriate for both ferrous and non-ferrous metal cutting applications, as well as plastic and plywood. The flexible back type allows the blade to track smoothly on bandsaw wheels without excessive fatigue cracking during normal service cycles. Typical applications include structural fabrication shops, HVAC duct fabrication, plumbing and mechanical contractors requiring on-site metal cutting, and general metalworking operations. The straight tooth rake angle contributes to controlled feed rates and clean cut surfaces on flat stock and tubing.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuratec SFB series carbon steel construction for blade body and teeth\u003c\/li\u003e\n\u003cli\u003eConstant pitch at 8 TPI for consistent chip load across the cut\u003c\/li\u003e\n\u003cli\u003eRaker tooth set with straight tooth form for balanced cutting action\u003c\/li\u003e\n\u003cli\u003eFlexible back type reduces blade fatigue and extends service life\u003c\/li\u003e\n\u003cli\u003eRated for contour cutting on ferrous metal, non-ferrous metal, plastic, and plywood\u003c\/li\u003e\n\u003cli\u003eWelded blade joint for continuous loop operation on standard bandsaw machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a replacement or spare welded bandsaw blade for bandsaws accepting a blade length of 11 feet 6 inches and a blade width of 0.75 inches. Verify wheel diameter, blade guide clearance, and tension specifications on the host machine before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBandsaw blade replacement should be performed by a qualified machinist or maintenance technician with the saw fully de-energized and locked out per OSHA lockout\/tagout procedures. Blade tension and tracking must be set according to the bandsaw manufacturer's specifications before running. Blade guides and thrust bearings should be inspected and adjusted to the new blade width before resuming operation. Always wear cut-resistant gloves when handling uncoiled or loop bandsaw blades.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 11 feet 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.032 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.4 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10715\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51544660476210,"sku":"10715","price":56.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_6dffd067-cd77-4c72-9f3c-4d7b82196af5.jpg?v=1785932853","url":"https:\/\/voomisupply.com\/products\/starrett-10715-welded-bandsaw-blade-8-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}