{"product_id":"starrett-10693-welded-bandsaw-blade-10-tpi-carbon-steel","title":"Starrett 10693 Welded Bandsaw Blade 10 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe STARRETT 10693 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for continuous contour cutting in metal fabrication, woodworking, and plastics applications. The blade measures 11 feet 5 inches in length and 0.75 inches wide, with a thickness of 0.032 inches and a constant 10 TPI pitch. The raker tooth set and straight tooth form produce consistent chip clearance during cuts. This blade is suited for HVAC shops, fabrication facilities, and trade environments where reliable bandsaw performance on varied materials is required. Licensed contractors and shop technicians handling ferrous metal, non-ferrous metal, plastic, and plywood are the primary installers and users.\u003c\/p\u003e\n\u003cp\u003eThe 10693 fits vertical or horizontal bandsaw machines that accept an 11 foot 5 inch blade length with a 0.75-inch width. Its carbon steel construction and flexible back type allow it to handle contour cuts in ferrous and non-ferrous metals, plastics, and plywood. The constant pitch pattern delivers a steady, predictable cut across all supported materials. This blade is appropriate for light industrial and trade shop use where a durable, general-purpose carbon steel blade is preferred over bi-metal alternatives.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDuratec SFB series carbon steel blade for general-purpose cutting\u003c\/li\u003e\n  \u003cli\u003eConstant 10 TPI pitch for steady, predictable cut performance\u003c\/li\u003e\n  \u003cli\u003eRaker tooth set with straight tooth form for efficient chip clearance\u003c\/li\u003e\n  \u003cli\u003eFlexible back type supports contour cutting applications\u003c\/li\u003e\n  \u003cli\u003eCompatible with ferrous metal, non-ferrous metal, plastic, and plywood\u003c\/li\u003e\n  \u003cli\u003eWelded construction for continuous loop operation on bandsaw machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for bandsaw machines that accept an 11 foot 5 inch blade length, 0.75-inch blade width, and 0.032-inch blade thickness. Suitable for cutting ferrous metal, non-ferrous metal, plastic, and plywood as specified by the manufacturer.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBlade installation should be performed by a qualified shop technician with the bandsaw powered off and unplugged before beginning. Verify wheel guides, blade tension, and tracking alignment against the machine manufacturer specifications before running the blade. Inspect the welded joint for cracks or separation before and after initial use. Follow applicable shop safety standards when handling bandsaw blades, as edges are sharp along the full blade length.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 11 feet 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.032 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.66 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10693\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51540535050546,"sku":"10693","price":52.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_e9b8bf01-e9d7-4bff-8bcd-1587aa5d6d0b.jpg?v=1785857736","url":"https:\/\/voomisupply.com\/products\/starrett-10693-welded-bandsaw-blade-10-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}