{"product_id":"starrett-00517-hole-saw-3-5-in-hss-toothed-edge","title":"Starrett 00517 Hole Saw 3.5 in Hss Toothed Edge","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 00517 is a high speed steel (HSS) hole saw designed for cutting through metal, steel, and wood in demanding trade and jobsite applications. With a 3.5-inch saw diameter and a cutting depth of 1.625 inches, it handles a wide range of through-hole and deep-set cuts. The toothed cutting edge runs at a constant pitch of 5.5 teeth per inch (TPI), delivering consistent chip removal and a clean bore. Electricians, plumbers, HVAC technicians, and general contractors rely on this style of hole saw when running conduit, pipe, or ductwork penetrations through structural materials.\u003c\/p\u003e\u003cp\u003eThe 00517 is suited for residential and light commercial installations where the operator needs to cut accurate-diameter holes in metal panels, steel studs, wood framing, and similar substrates. Its 3.5-inch diameter makes it a common choice for larger pipe and conduit pass-throughs. The 1.625-inch cutting depth accommodates standard wall and panel thicknesses encountered in typical mechanical and electrical rough-in work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3.5-inch saw diameter for large-bore penetrations in panels, framing, and sheet material\u003c\/li\u003e\n\u003cli\u003e1.625-inch cutting depth handles standard wall and panel stock\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction for durability against metal and wood cutting loads\u003c\/li\u003e\n\u003cli\u003eConstant 5.5 TPI pitch pattern for consistent chip evacuation and smooth bore finish\u003c\/li\u003e\n\u003cli\u003eToothed cutting edge compatible with standard arbor-driven drill setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement hole saw for use with standard hole saw arbors accepting 3.5-inch diameter blades.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed electrician, plumber, or HVAC technician following applicable NEC, IPC, or IFGC requirements for penetration locations and fire-stopping. Secure the workpiece before cutting and use appropriate RPM settings for the material being cut — lower speeds are recommended for metal substrates. Always wear eye protection and ensure the arbor pilot bit is properly seated before beginning a cut. Remove the plug from the saw teeth after each cut to prevent binding.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaw Diameter\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Depth\u003c\/strong\u003e: 1.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaw Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch\u003c\/strong\u003e: 5.5 TPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Metal, Steel, Wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 3.5 x 3.5 x 1.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 00517\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51542067839282,"sku":"00517","price":34.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a1987845efe8427ead9bb81e247b7fba.jpg?v=1785891108","url":"https:\/\/voomisupply.com\/products\/starrett-00517-hole-saw-3-5-in-hss-toothed-edge","provider":"Voomi Supply","version":"1.0","type":"link"}