{"product_id":"starrett-00062-welded-bandsaw-blade-4-tpi-carbon-steel","title":"Starrett 00062 Welded Bandsaw Blade 4 Tpi Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 00062 is a welded bandsaw blade from the Duratec SFB series, designed for contour cutting in metalworking and fabrication environments. At 14 feet 6 inches in length and 0.5 inches wide, this blade installs on floor-standing bandsaws common in shop and trade settings. It runs at 4 teeth per inch with a constant pitch and a raker tooth set in a skip tooth form, a combination that clears chips efficiently and reduces heat buildup during cuts through thicker stock. Both the blade body and teeth are carbon steel construction with a flexible back for consistent tracking and reduced breakage risk.\u003c\/p\u003e\u003cp\u003eThis blade suits a wide range of cutting applications in production shops, HVAC fabrication bays, plumbing supply fabrication, and general metalworking environments. Its skip tooth geometry and straight rake angle make it effective on ferrous metals, non-ferrous metals, plastics, and plywood. Contour cutting capability allows operators to follow curved cut lines in addition to straight crosscuts, expanding its usefulness across multiple trade applications.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuratec SFB series welded construction for a strong, consistent joint at the blade weld point\u003c\/li\u003e\n\u003cli\u003e4 TPI constant pitch for steady feed rates through varied stock thicknesses\u003c\/li\u003e\n\u003cli\u003eRaker tooth set with skip tooth form promotes efficient chip clearance and cooler cutting\u003c\/li\u003e\n\u003cli\u003eFlexible back type maintains blade tracking and resists fatigue cracking on curves\u003c\/li\u003e\n\u003cli\u003eCarbon steel blade and tooth material rated for ferrous metal, non-ferrous metal, plastic, and plywood\u003c\/li\u003e\n\u003cli\u003eStraight rake angle delivers controlled, predictable cutting geometry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a replacement or spare welded bandsaw blade for floor-standing bandsaws accepting a 14-foot 6-inch blade length with a 0.5-inch blade width. Confirm wheel size and blade tracking specs on the saw before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBandsaw blade replacement should be performed by a qualified technician following the saw manufacturer's service procedures. Disconnect and lock out power to the machine before removing the old blade or installing the new one. Wear cut-resistant gloves when handling the blade, as the toothed edge presents a laceration hazard even when the machine is off. After installation, verify blade tension, tracking alignment, and guard adjustment before returning the saw to service.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 14 feet 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Skip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Duratec SFB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal, Plastic, Plywood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 00062\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51542756688178,"sku":"00062","price":50.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee43fea376a18bd8349f67f828f3345d_511e2b75-44c5-493b-b014-be9bbbed4d54.jpg?v=1785906419","url":"https:\/\/voomisupply.com\/products\/starrett-00062-welded-bandsaw-blade-4-tpi-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}