{"product_id":"square-d-vccf1-cam-disconnect-switch-20a-690vac","title":"Square D VCCF1 Cam Disconnect Switch 20A 690VAC","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SQUARE D VCCF1 is a fused, enclosed cam disconnect switch rated for 20 amps at 690 volts AC. It features a 3-pole, 3-wire configuration with a 3NO contact form, making it suitable for isolating and protecting three-phase electrical circuits. The enclosure carries dual ingress protection ratings of IP20 and IP65, providing flexibility across indoor and select outdoor applications. The unit ships with a handle and shaft extension included. Electricians and industrial maintenance technicians install this switch as a local disconnect point in compliance with NEC and IEC installation requirements. Overall height is 2.91 inches and overall width is 2.36 inches.\u003c\/p\u003e\u003cp\u003eThe VCCF1 is used in commercial and light industrial electrical distribution systems where a fused local disconnect is required on motor branch circuits, machinery, or panel feed applications. The IP65 rating makes it appropriate for locations where dust and water jets are a concern. The enclosed design and NEMA 1 and 12 ratings suit indoor industrial environments where drip protection and protection from falling dirt are needed. Licensed electricians perform the installation as part of branch circuit or motor circuit work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e20A continuous current rating at 690 volts AC\u003c\/li\u003e\n\u003cli\u003e3-pole, 3-wire, 3NO contact configuration for three-phase circuit isolation\u003c\/li\u003e\n\u003cli\u003eDual ingress protection: IP20 and IP65\u003c\/li\u003e\n\u003cli\u003eNEMA 1 and NEMA 12 enclosure ratings for indoor industrial use\u003c\/li\u003e\n\u003cli\u003eIncludes handle and shaft extension for complete installation\u003c\/li\u003e\n\u003cli\u003eCertified to CSA, GL, IEC 60947-3, and UL standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style enclosed cam disconnect switch for commercial and industrial branch circuit and motor circuit applications requiring a fused local isolator.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation must be performed by a licensed electrician in accordance with the NEC and applicable local codes. De-energize and lock out the upstream circuit before mounting or wiring the switch. Verify that the incoming conductor size and fuse rating are matched to the 20A rating of the device. The shaft extension must be properly aligned with the operator handle before securing the enclosure cover.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage\u003c\/strong\u003e: 20 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 690 volts AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Poles\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Form\u003c\/strong\u003e: 3NO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 2.91 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 2.36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Type\u003c\/strong\u003e: Enclosed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA Rating\u003c\/strong\u003e: 1, 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating\u003c\/strong\u003e: IP20, IP65\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes\u003c\/strong\u003e: Handle, Shaft Extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: CSA Certified, GL, IEC 60947-3, UL Certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.76 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SQUARE D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: VCCF1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SCHNEIDER ELECTRIC","offers":[{"title":"Default Title","offer_id":51540880294194,"sku":"VCCF1","price":265.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ae3aa1409241f0be4000eb6ee159f710_68c4ef12-284d-4a7b-a333-bfeb6c4227bc.jpg?v=1785865280","url":"https:\/\/voomisupply.com\/products\/square-d-vccf1-cam-disconnect-switch-20a-690vac","provider":"Voomi Supply","version":"1.0","type":"link"}