{"product_id":"southwire-920030608-rg6-coaxial-cable-75-ohm-18-awg","title":"Southwire 920030608 RG6 Coaxial Cable 75 Ohm 18 Awg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SOUTHWIRE 920030608 is an RG6 coaxial cable rated at 75 ohms impedance, built on an 18 AWG steel conductor with a dual-layer braid and foil shield. The cable measures 0.269 inches in outside diameter and is jacketed in sun-resistant PVC, making it suitable for both indoor and outdoor runs. It ships as a 1,000-foot coil and is sold in cut-to-length increments of 1 foot, with a minimum cut length of 250 feet. Licensed electricians and low-voltage technicians use this cable for video distribution, antenna feeds, and structured wiring installations where a reliable 75-ohm signal path is required.\u003c\/p\u003e\n\u003cp\u003eThis cable is appropriate for residential and light commercial applications including satellite dish runs, over-the-air antenna installations, cable TV distribution, and structured wiring systems. The PVC jacket with sun-resistant properties allows installation in exterior conduit or direct-routed outdoor runs. The 60 percent shield coverage from the combined foil and braid construction helps reduce signal loss and interference across the run. It is sold from a 1,000-foot coil with a 250-foot minimum order quantity.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eRG6 coaxial construction with 75 ohms impedance for standard video and antenna applications\u003c\/li\u003e\n  \u003cli\u003e18 AWG steel conductor for consistent signal transmission\u003c\/li\u003e\n  \u003cli\u003eDual-layer shield: foil plus braid at 60 percent shield coverage to reduce interference\u003c\/li\u003e\n  \u003cli\u003eSun-resistant PVC jacket rated for outdoor and exposed installations\u003c\/li\u003e\n  \u003cli\u003eMaximum operating temperature of 167 degrees F\u003c\/li\u003e\n  \u003cli\u003eCut to length in 1-foot increments from a 1,000-foot coil (250-foot minimum)\u003c\/li\u003e\n  \u003cli\u003eMeets NEC Article 725 and 800, UL 1581, ETL Dual Listed, and RoHS 2011\/65\/EU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard RG6 75-ohm coaxial cable for use in residential and commercial low-voltage signal distribution systems including satellite, cable TV, and antenna installations where RG6 specification cable is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed electrician or qualified low-voltage technician in accordance with NEC Article 800 for communication circuits and Article 725 for Class 2 and Class 3 circuits. De-energize and verify the absence of voltage on any connected equipment before terminating or splicing the cable. Use proper coaxial compression or crimp connectors rated for RG6; avoid sharp bends that could compromise the shielding geometry. Outdoor runs should be protected from standing water ingress at termination points.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable Type\u003c\/strong\u003e: Coaxial RG6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpedance\u003c\/strong\u003e: 75 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConductor Size\u003c\/strong\u003e: 18 AWG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConductor Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShield Type\u003c\/strong\u003e: Foil and Braid\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShield Coverage\u003c\/strong\u003e: 60 percent\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.269 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJacket Material\u003c\/strong\u003e: PVC, Sun-Resistant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Operating Temperature\u003c\/strong\u003e: 167 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Coil Length\u003c\/strong\u003e: 1,000 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Cut Length\u003c\/strong\u003e: 250 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut Increment\u003c\/strong\u003e: 1 foot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.36 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards Met\u003c\/strong\u003e: NEC Article 725 and 800, UL 1581, ETL Dual Listed, RoHS 2011\/65\/EU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SOUTHWIRE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 920030608\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SOUTHWIRE","offers":[{"title":"Default Title","offer_id":51542999761202,"sku":"920030608","price":51.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/710291b2153948c90bf5ad75a68476b7.jpg?v=1785913387","url":"https:\/\/voomisupply.com\/products\/southwire-920030608-rg6-coaxial-cable-75-ohm-18-awg","provider":"Voomi Supply","version":"1.0","type":"link"}