{"product_id":"slant-fin-104-002-070-hot-water-baseboard-heater-7-ft","title":"Slant-fin 104-002-070 Hot Water Baseboard Heater 7 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SLANT-FIN 104-002-070 is a complete hot water baseboard heater assembly designed for residential hydronic heating systems. The unit ships fully assembled with a copper element, aluminum fins, and an electro-galvanized cold rolled steel enclosure finished in Nu-White baked enamel. It accepts a 3\/4-inch element connection and delivers between 150 and 840 BTU\/h at 1 GPM or 160 to 890 BTU\/h at 4 GPM, depending on system flow rate. The assembly is 7 feet long and includes a pivot-mounted damper vane for individual room temperature control. Licensed plumbers and hydronic heating contractors handle installation in residential applications.\u003c\/p\u003e\n\u003cp\u003eThis baseboard unit is built for single-family homes, apartments, and renovation projects where a clean, low-profile hydronic heating solution is needed. The 1-3\/4-inch floor-to-front cover opening promotes convection airflow across the copper-fin-tube element. The high-strength support brackets and no-noise expansion cradles keep accessories fitted securely along the full length of the enclosure. A 2-inch splice plate is included for multi-section runs, and extendable accessories allow wall-to-wall installation without field cutting.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFully assembled 7-foot hot water baseboard unit with copper element and aluminum fins\u003c\/li\u003e\n  \u003cli\u003eHeating output of 150 to 840 BTU\/h at 1 GPM and 160 to 890 BTU\/h at 4 GPM\u003c\/li\u003e\n  \u003cli\u003e3\/4-inch element connection compatible with standard copper fittings\u003c\/li\u003e\n  \u003cli\u003ePivot-mounted, fully modulating damper vane for room-by-room temperature control\u003c\/li\u003e\n  \u003cli\u003eNo-noise expansion cradles and high-strength support brackets maintain a secure, rattle-free fit\u003c\/li\u003e\n  \u003cli\u003eNu-White baked enamel finish on electro-galvanized cold rolled steel enclosure\u003c\/li\u003e\n  \u003cli\u003eExtendable accessories for wall-to-wall fit with no cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation component for residential hot water baseboard heating systems operating within a temperature range of 110 to 220 degrees F and flow rates of 1 or 4 GPM.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed plumber or hydronic heating contractor. Shut down the boiler and relieve system pressure before making any element connections or modifications to existing baseboard runs. Ensure the copper element connection is properly supported and that all fittings are tightened to the fitting manufacturer specification before restoring system pressure. Local plumbing codes and IFGC requirements should be referenced for any applicable installation standards.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Hot Water Baseboard Assembly\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeating Capacity\u003c\/strong\u003e: 150 to 840 BTU\/h at 1 GPM; 160 to 890 BTU\/h at 4 GPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElement Connection Size\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElement Material\u003c\/strong\u003e: Copper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFin Material\u003c\/strong\u003e: Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Fin Material\u003c\/strong\u003e: Plated Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure Material\u003c\/strong\u003e: Electro-Galvanized Cold Rolled Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\/Finish\u003c\/strong\u003e: Nu-White Baked Enamel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 7 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDepth\u003c\/strong\u003e: 2-11\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 7-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFin Size\u003c\/strong\u003e: 2-5\/8 inches x 2-1\/8 inches x 0.009 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Fins\u003c\/strong\u003e: 55 per foot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Rate\u003c\/strong\u003e: 1 or 4 GPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: 110 to 220 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDifferential Pressure Rating\u003c\/strong\u003e: 47 milliinch\/ft at 1 GPM; 525 milliinch\/ft at 4 GPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInclusions\u003c\/strong\u003e: Damper vane, heating element, expansion cradles, 2-inch splice plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Residential\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 1 year after original installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SLANT-FIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 104-002-070\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SLANT-FIN","offers":[{"title":"Default Title","offer_id":51467621433650,"sku":"104-002-070","price":112.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313946798.jpg?v=1783908479","url":"https:\/\/voomisupply.com\/products\/slant-fin-104-002-070-hot-water-baseboard-heater-7-ft","provider":"Voomi Supply","version":"1.0","type":"link"}