{"product_id":"skf-6205-2rsjem-deep-groove-ball-bearing-52mm-double-seal","title":"Skf 6205 2RSJEM Deep Groove Ball Bearing 52mm Double Seal","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SKF 6205 2RSJEM is a deep groove ball bearing designed for radial and light axial load applications across a wide range of rotating equipment. This single-row bearing features a 52 mm outside diameter, a round bore, and a double-seal configuration that retains grease lubrication and blocks contamination from the bearing raceway. The steel cage and steel housing material support continuous operation at speeds up to 8,500 RPM. The ABEC-3 tolerance class meets standard precision requirements for most industrial and HVAC fan, pump, and motor shaft applications. Installed by mechanical technicians and HVAC service pros as a direct OEM-style replacement in belt-drive blowers, fan assemblies, and pump shafts.\u003c\/p\u003e\n\u003cp\u003eThis bearing is suited for residential and light commercial equipment where sealed, pre-lubricated bearings reduce maintenance intervals. Common install scenarios include direct-drive and belt-drive blower motors, circulator pumps, and small fractional-horsepower motor shafts. The double-seal design eliminates the need for field lubrication after installation, making it a practical choice in hard-to-access motor housings or fan compartments where periodic regreasing is not feasible.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e52 mm outside diameter with round bore for standard shaft fitment\u003c\/li\u003e\n  \u003cli\u003eDouble-seal design retains grease and excludes contaminants without additional field lubrication\u003c\/li\u003e\n  \u003cli\u003eSteel cage and steel housing for durability in continuous-duty rotating applications\u003c\/li\u003e\n  \u003cli\u003eRated to 8,500 RPM maximum for compatibility with standard motor and blower shaft speeds\u003c\/li\u003e\n  \u003cli\u003eABEC-3 tolerance class meets precision requirements for general industrial and HVAC equipment\u003c\/li\u003e\n  \u003cli\u003eSingle-row configuration suits radial-load-dominant applications such as fan and pump shafts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement bearing for motors, blowers, pumps, and rotating equipment requiring a 6205-series deep groove ball bearing with a double-seal, single-row configuration and 52 mm outside diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified mechanical or HVAC technician. Disconnect and lock out all electrical power to the equipment before removing the existing bearing. Use a proper bearing press or driver to seat the bearing evenly on the shaft and into the housing bore  -  never strike the bearing directly with a hammer. Verify shaft and housing dimensions match the 6205-series specifications before pressing to avoid damage to the races or seals.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Series\u003c\/strong\u003e: 6205\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Deep Groove Ball Bearing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 52 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle\u003c\/strong\u003e: Double Seal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRow Type\u003c\/strong\u003e: Single Row\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore Type\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCage Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHousing Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLubricant Type\u003c\/strong\u003e: Grease\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 8,500\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eABEC Rating\u003c\/strong\u003e: ABEC-3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSnap Ring Included\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.287 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SKF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6205 2RSJEM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":67917579878706,"sku":"6205 2RSJEM","price":44.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/900121532421c034aa1a8e6da70b82ea.jpg?v=1791264044","url":"https:\/\/voomisupply.com\/products\/skf-6205-2rsjem-deep-groove-ball-bearing-52mm-double-seal","provider":"Voomi Supply","version":"1.0","type":"link"}