{"product_id":"skf-3204-a-2rs1-angular-contact-ball-bearing-20mm-bore","title":"Skf 3204 A-2RS1 Angular Contact Ball Bearing 20mm Bore","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SKF 3204 A-2RS1 is a double-row angular contact ball bearing designed to handle combined radial and axial loads in demanding industrial and mechanical applications. It features a 30-degree contact angle, which allows it to manage significant thrust loads in both directions simultaneously. With a dynamic load capacity of 19,000 pounds and a static load capacity of 12,000 pounds, this bearing is built for high-load environments. The double-seal (2RS1) configuration and steel cage provide contamination resistance and structural integrity across a wide range of operating speeds up to 9,000 RPM. Licensed HVAC technicians, mechanical contractors, and industrial maintenance professionals are the typical installers.\u003c\/p\u003e\n\u003cp\u003eThis bearing is suited for residential and light commercial mechanical systems, pump assemblies, fan shaft applications, compressor drives, and general industrial machinery where combined load capacity and contamination resistance are required. The double-row design makes it a practical choice for applications where a single-row bearing would be insufficient for the axial load demands. Its round bore and standard metric dimensions allow straightforward fitment in new builds and replacement scenarios alike.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e30-degree contact angle supports simultaneous radial and axial loading\u003c\/li\u003e\n  \u003cli\u003eDouble-row configuration delivers higher load capacity than single-row equivalents\u003c\/li\u003e\n  \u003cli\u003eDouble-sealed (2RS1) design resists contamination without requiring external shielding\u003c\/li\u003e\n  \u003cli\u003eSteel cage provides durability at speeds up to 9,000 RPM\u003c\/li\u003e\n  \u003cli\u003eABEC-3 precision rating ensures consistent dimensional tolerances\u003c\/li\u003e\n  \u003cli\u003eNo snap ring or flange  -  clean installation into standard bearing housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement double-row angular contact ball bearing for equipment with a 20 mm round bore shaft and a 47 mm bore housing requiring a 30-degree contact angle bearing.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified mechanical technician or maintenance professional. Always de-energize and lock out the equipment before removing or installing bearings. Use a proper bearing press or induction heater to seat the bearing  -  never strike the bearing directly with a hammer, as this can damage the races and seals. Verify shaft and housing tolerances against the bearing specifications before pressing to avoid preload issues.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Series\u003c\/strong\u003e: 3204 A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Angular Contact Ball Bearing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRow Type\u003c\/strong\u003e: Double Row\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContact Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDynamic Load Capacity\u003c\/strong\u003e: 19,000 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Load Capacity\u003c\/strong\u003e: 12,000 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 9,000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore Diameter\u003c\/strong\u003e: 20 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 47 mm (1.8500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 20.60 mm (0.8100 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal Type\u003c\/strong\u003e: Double Seal (2RS1)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Seals\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore Type\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCage Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSnap Ring\u003c\/strong\u003e: Not included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlange Type\u003c\/strong\u003e: Without Flange\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eABEC Rating\u003c\/strong\u003e: ABEC-3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.31 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SKF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3204 A-2RS1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":67907001549106,"sku":"3204 A-2RS1","price":108.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e92bd06e2e542ebae88def81f78456f7.jpg?v=1791173270","url":"https:\/\/voomisupply.com\/products\/skf-3204-a-2rs1-angular-contact-ball-bearing-20mm-bore","provider":"Voomi Supply","version":"1.0","type":"link"}