{"product_id":"sigma-811007806-90-deg-reducing-elbow-3-4x1-2-in-150-lb","title":"Sigma 811007806 90 Deg Reducing Elbow 3\/4x1\/2 in 150 Lb","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SIGMA 811007806 is a FIG 3101R 90-degree reducing pipe elbow rated at 150 lb, manufactured from galvanized malleable iron. It transitions from a 3\/4-inch nominal female inlet to a 1\/2-inch nominal female outlet using FNPT end connections on both ports. The galvanized finish provides corrosion resistance for use in exposed or moderately harsh environments. This fitting is used by licensed plumbers and pipefitters to change both flow direction and pipe size in a single component, reducing the need for an additional coupling in the run. It suits low-pressure water, steam, and air distribution systems within the 150 lb pressure class.\u003c\/p\u003e\n\u003cp\u003eThis reducing elbow is suited for residential and light commercial piping applications where a 90-degree directional change and a step-down in pipe size are required in the same fitting. Typical installations include water supply lines, compressed air distribution, and low-pressure steam systems. The FNPT threading allows straightforward installation with standard pipe thread sealant or PTFE tape. It is an import-grade fitting conforming to standard 150 lb malleable iron fitting dimensions.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e90-degree elbow with integral reducing capability eliminates the need for a separate reducing coupling\u003c\/li\u003e\n  \u003cli\u003e3\/4 inch x 1\/2 inch nominal FNPT connections on both ends\u003c\/li\u003e\n  \u003cli\u003e150 lb pressure class rating suitable for water, air, and low-pressure steam service\u003c\/li\u003e\n  \u003cli\u003eMalleable iron construction provides strength and resistance to mechanical shock\u003c\/li\u003e\n  \u003cli\u003eGalvanized finish adds corrosion protection for exposed or damp installations\u003c\/li\u003e\n  \u003cli\u003eStandard FIG 3101R dimensional pattern for compatibility with common malleable iron fitting assortments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for 150 lb malleable iron threaded piping systems using 3\/4-inch to 1\/2-inch nominal pipe size transitions.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a licensed plumber or pipefitter following applicable IPC and IFGC guidelines for threaded pipe connections. Shut off and depressurize the piping system completely before removing or installing any fitting. Apply an approved pipe thread sealant or PTFE tape to the male threads mating into this fitting before assembly. Do not over-tighten; use a pipe wrench with proper backup to avoid cracking the fitting body.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFigure Number\u003c\/strong\u003e: FIG 3101R\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: 90-degree reducing elbow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInlet Size (Nominal)\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutlet Size (Nominal)\u003c\/strong\u003e: 1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Style\u003c\/strong\u003e: FNPT (Female National Pipe Taper) both ends\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Class\u003c\/strong\u003e: 150 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Malleable iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Galvanized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin\u003c\/strong\u003e: Import\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SIGMA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 811007806\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIGMA","offers":[{"title":"Default Title","offer_id":51525205426482,"sku":"GAL90LRED3412I-LF","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ec68484c912396e23ffa28c8833858cd_324ca39f-6358-409c-8f9b-562660053942.jpg?v=1785467167","url":"https:\/\/voomisupply.com\/products\/sigma-811007806-90-deg-reducing-elbow-3-4x1-2-in-150-lb","provider":"Voomi Supply","version":"1.0","type":"link"}