{"product_id":"sharkbite-u088lf-3-4-in-push-to-connect-fnpt-adapter","title":"Sharkbite u088lf 3\/4 in Push-to-connect Fnpt Adapter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SHARKBITE u088lf is a 3\/4-inch push-to-connect by 3\/4-inch female NPT (FNPT) transition adapter made from lead-free DZR brass. It allows a direct connection between a push-fit pipe end and a female threaded fitting or valve without soldering, clamps, glue, or specialty tools. Stainless steel gripping teeth bite into the pipe on insertion while a compression O-ring creates a watertight seal. Rated to 200 degrees F and 200 psi, this adapter is suited for potable water supply and hydronic heating systems. Licensed plumbers and experienced trades install it during new construction, retrofit work, or emergency repairs where speed and code compliance are both required.\u003c\/p\u003e\n\u003cp\u003eThis adapter is used in residential and light commercial plumbing applications where a push-fit connection must transition to a threaded female port. It accepts copper, PEX, CPVC, or PE-RT pipe on the push-fit end in any combination, making it a reliable choice for mixed-material piping systems. The fitting is also removable and reusable using a standard SharkBite disconnect clip or tool, which is useful in tight spaces or systems that may require future service. Its straight configuration suits inline transitions at fixtures, valves, and manifolds.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLead-free DZR brass construction meets potable water requirements\u003c\/li\u003e\n  \u003cli\u003ePush-to-connect end accepts copper, PEX, CPVC, or PE-RT pipe with no soldering or glue\u003c\/li\u003e\n  \u003cli\u003eStainless steel gripping teeth and compression O-ring provide a secure, watertight seal\u003c\/li\u003e\n  \u003cli\u003eRated to 200 degrees F and 200 psi for water supply and hydronic heating use\u003c\/li\u003e\n  \u003cli\u003eRemovable and reusable with a disconnect tool for easier service in tight spaces\u003c\/li\u003e\n  \u003cli\u003eMeets UPC, IPC, and cUPC certification requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 3\/4-inch copper, PEX, CPVC, or PE-RT pipe on the push-fit end and any standard 3\/4-inch female NPT threaded port on the opposite end. Certified for potable water supply and hydronic heating applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by licensed plumbers or qualified trades in accordance with applicable IPC or UPC code requirements. Shut off the water supply and relieve system pressure before installing or removing this fitting. Ensure the pipe end is cut clean and square with no burrs, and that the insertion depth mark is visible after seating. To remove the fitting, use a SharkBite disconnect clip or tool — do not attempt to pull the fitting free without fully depressing the collet.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection 1\u003c\/strong\u003e: Push-to-connect (PTC), 3\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection 2\u003c\/strong\u003e: Female NPT (FIP), 3\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Orientation\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 0.75 inches x 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Lead-free DZR brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 200 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Length\u003c\/strong\u003e: 1.85 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Depth\u003c\/strong\u003e: 1.4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Width\u003c\/strong\u003e: 6.05 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Height\u003c\/strong\u003e: 4.1 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: Lead-free, UPC, IPC, cUPC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTAA\/BAA Compliant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePack Size\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SHARKBITE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: u088lf\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SHARKBITE","offers":[{"title":"Default Title","offer_id":51138803630386,"sku":"U088LF","price":32.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/305527472.png?v=1778263617","url":"https:\/\/voomisupply.com\/products\/sharkbite-u088lf-3-4-in-push-to-connect-fnpt-adapter","provider":"Voomi Supply","version":"1.0","type":"link"}