{"product_id":"sgs-pro-11553-carbide-burr-cylinder-end-cut-1-4-in","title":"Sgs Pro 11553 Carbide Burr Cylinder End Cut 1\/4 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS PRO 11553 is a double-cut tungsten carbide rotary burr with a cylinder-with-end-cut head profile, conforming to industry specification SB-51. It carries a cutting diameter of 0.25 inches and a length of cut of 0.1875 inches, with an overall tool length of 1.75 inches and a 0.125-inch shank diameter. The uncoated tungsten carbide head is rated for continuous use up to 55,000 RPM. Machinists, toolmakers, and fabricators use this burr for aggressive material removal, deburring, and surface finishing across a wide range of metals.\u003c\/p\u003e\n\u003cp\u003eThe 11553 is suited for use on steel, hardened steel, stainless steel, cast iron, titanium, nickel, copper, and copper alloys. Its end-cut geometry allows the burr to plunge into a surface or work in confined pockets where a standard end-profile-only burr cannot reach. Typical applications include weld seam blending, port matching, gasket surface preparation, and edge chamfering on ferrous and non-ferrous workpieces. The 0.125-inch shank fits standard die grinder collets used in most shop and field environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDouble-cut flute pattern for fast material removal and reduced chatter on hard metals\u003c\/li\u003e\n\u003cli\u003eEnd-cut geometry enables plunge cuts and work in blind pockets\u003c\/li\u003e\n\u003cli\u003eUncoated tungsten carbide head provides wear resistance across ferrous and non-ferrous materials\u003c\/li\u003e\n\u003cli\u003eRated to 55,000 RPM for use with pneumatic and electric die grinders\u003c\/li\u003e\n\u003cli\u003e0.125-inch shank fits standard die grinder collets without adapters\u003c\/li\u003e\n\u003cli\u003eConforms to industry specification SB-51 for consistent head geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with die grinders and rotary tools accepting a 0.125-inch collet. Compatible with steel, hardened steel, stainless steel, cast iron, titanium, nickel, copper, and copper alloys as stated by the manufacturer.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eA licensed machinist, toolmaker, or experienced fabricator should install and operate rotary burrs. Secure the shank fully in the collet and torque the collet nut to the tool manufacturer specification before use. Always wear appropriate eye and face protection and verify the tool is rated for the intended RPM before operation. Inspect the burr for chips or cracks before each use and replace any damaged tool immediately.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Specification\u003c\/strong\u003e: SB-51\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Shape\u003c\/strong\u003e: Cylinder with End Cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Style\u003c\/strong\u003e: Double Cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.1875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Material\u003c\/strong\u003e: Tungsten Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Coating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 55,000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Steel, Hardened Steel, Stainless Steel, Cast Iron, Titanium, Nickel, Copper, Copper Alloys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112809\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS PRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 11553\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SGS PRO","offers":[{"title":"Default Title","offer_id":52107799429426,"sku":"11553","price":25.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7562f28fde2997a5e692e3c5ed4d2ef6.jpg?v=1790074412","url":"https:\/\/voomisupply.com\/products\/sgs-pro-11553-carbide-burr-cylinder-end-cut-1-4-in","provider":"Voomi Supply","version":"1.0","type":"link"}