{"product_id":"sgs-pro-10296-abrasive-bur-sl-4-cylinder-1-4-inch-shank","title":"Sgs Pro 10296 Abrasive Bur SL-4 Cylinder 1\/4 Inch Shank","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS PRO 10296 is a tungsten carbide abrasive bur in the SL-4 cylinder profile, designed for aggressive material removal on hard metals. The ball nose cone head shape with Omega Cut tooth style delivers fast stock removal and a consistent finish on difficult workpieces. With a 1\/2-inch cutting diameter, a 1-1\/8-inch length of cut, and a maximum rated speed of 28,000 RPM, this bur is built for high-speed die grinder and rotary tool work. It fits a standard 1\/4-inch shank collet and measures 3 inches overall length. Machinists, fabricators, and tool-and-die techs reach for this type of bur for deburring, porting, and contouring operations where carbide hardness is required.\u003c\/p\u003e\n\u003cp\u003eThis bur is suited for use on steel, stainless steel, cast iron, titanium, nickel, copper, and copper alloys. It is a practical choice for weld cleanup, cavity work, and edge preparation in fabrication shops, maintenance environments, and production settings. The uncoated tungsten carbide head performs reliably across the full range of listed materials without the need for cutting fluid in most light-duty passes, though coolant can extend tool life in continuous heavy cuts.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eTungsten carbide head construction for hardness and wear resistance on ferrous and non-ferrous metals\u003c\/li\u003e\n  \u003cli\u003eOmega Cut tooth style designed for rapid material removal with reduced chatter\u003c\/li\u003e\n  \u003cli\u003eBall nose cone geometry per SL-4 industry specification for profiling and contouring work\u003c\/li\u003e\n  \u003cli\u003e1\/2-inch cutting diameter with 1-1\/8-inch length of cut for substantial stock removal per pass\u003c\/li\u003e\n  \u003cli\u003eRated to 28,000 RPM for compatibility with standard pneumatic and electric die grinders\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch shank fits the most common collet size on rotary tools and die grinders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in any die grinder or rotary tool equipped with a 1\/4-inch collet. Meets SL-4 DDC industry specification for abrasive bur form and fit.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist, fabricator, or maintenance technician using a standard die grinder with a 1\/4-inch collet. Secure the shank fully into the collet and tighten to the tool manufacturer's specified torque before operating. Inspect the bur for cracks or chips before each use and do not exceed the rated 28,000 RPM. Always wear appropriate eye protection and secure the workpiece before beginning any grinding or deburring operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Specification\u003c\/strong\u003e: SL-4 DDC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Shape\u003c\/strong\u003e: Ball Nose Cone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Style\u003c\/strong\u003e: Omega Cut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Material\u003c\/strong\u003e: Tungsten Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Coating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Titanium, Nickel, Copper, Copper Alloys\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 28,000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 14 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112809\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS PRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10296\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SGS PRO","offers":[{"title":"Default Title","offer_id":51972372463922,"sku":"10296","price":59.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9f0b20f51bdbf36db92f7b5546300eb3.jpg?v=1789967064","url":"https:\/\/voomisupply.com\/products\/sgs-pro-10296-abrasive-bur-sl-4-cylinder-1-4-inch-shank","provider":"Voomi Supply","version":"1.0","type":"link"}