{"product_id":"sgs-70485-square-end-mill-5-8-inch-4-flute-solid-carbide","title":"Sgs 70485 Square End Mill 5\/8 Inch 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 70485 is a solid carbide square end mill designed for high-performance milling in demanding industrial and production machining environments. Built on SGS Series 7 geometry, this tool features a 5\/8 inch cutting diameter, a 3 inch length of cut, and a 6 inch overall length, placing it in the extra-long category for reach-critical applications. The AlTiN coating provides elevated heat resistance and surface hardness, extending tool life in dry or semi-dry cutting conditions. Four spiral flutes with a variable index configuration reduce harmonic chatter and improve chip evacuation. The 38-degree helix angle is optimized for aggressive material removal rates while maintaining edge stability. Licensed machinists and CNC operators in job shops and production facilities are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThe SGS 70485 is suited for milling operations on a broad range of workpiece materials, including steel, stainless steel, cast iron, non-ferrous metals, and high-temperature alloys, as indicated by the primary material codes P, M, K, H, and S. The extra-long reach and 3 inch length of cut make it well-suited for deep-pocket milling, step milling, and slotting operations where standard-length tools cannot access the feature. Its centercutting capability allows direct plunge entry without a pre-drilled pilot hole.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide micrograin construction for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for high heat resistance in dry and semi-dry cutting\u003c\/li\u003e\n  \u003cli\u003eVariable index flute spacing reduces chatter and vibration during heavy cuts\u003c\/li\u003e\n  \u003cli\u003e38-degree spiral helix angle promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting design enables direct plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eExtra-long 6 inch OAL with 3 inch LOC for deep-pocket and extended-reach applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with standard CNC machining centers and manual mills accepting a 5\/8 inch straight-cylindrical shank. Suitable for use on workpiece materials corresponding to ISO material groups P (steel), M (stainless steel), K (cast iron), H (hardened materials), and S (high-temperature alloys).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tool should be installed by a qualified machinist or CNC operator familiar with carbide end mill handling and runout tolerances. Secure the shank in a collet or end mill holder to the manufacturer-specified retention torque using a calibrated torque wrench; verify TIR does not exceed acceptable limits before initiating a cut. AlTiN-coated carbide tools are not recommended for use on aluminum or magnesium alloys. Inspect the cutting edges and coating condition before each use; do not run a chipped or damaged tool.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Extra Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00043 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 7\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 70485\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51743816778034,"sku":"70485","price":328.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4a585b95763824ceedd1778a4d18b691.jpg?v=1788849980","url":"https:\/\/voomisupply.com\/products\/sgs-70485-square-end-mill-5-8-inch-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}