{"product_id":"sgs-70483-square-end-mill-0-5in-4-flute-solid-carbide-altin","title":"Sgs 70483 Square End Mill 0.5in 4 Flute Solid Carbide Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 70483 is a solid carbide square end mill designed for demanding material removal in CNC machining and manual milling operations. It features a 0.5 inch cutting diameter, a 3 inch length of cut, and a 6 inch overall length, making it suited for deep-pocket and extended-reach applications. The four-flute geometry with a 38-degree helix angle promotes efficient chip evacuation and smooth surface finishes. An AlTiN coating improves heat resistance and tool life in high-temperature cutting environments. The micrograin carbide substrate provides the hardness and edge retention needed for interrupted cuts and abrasive workpiece materials. This tool is installed and operated by machinists, tool-and-die makers, and CNC programmers working in job shops and production environments.\u003c\/p\u003e\n\u003cp\u003eThe SGS 70483 is rated for use across a broad range of workpiece material categories, including hardened steels, cast irons, stainless steels, carbon and alloy steels, and superalloys, corresponding to material codes H, K, M, P, and S. The extra-long length type and 3 inch length of cut make it well suited for deep-slot milling, pocketing, and profiling where standard-length end mills cannot reach. The centercutting capability allows plunge entry directly into the workpiece without a pre-drilled pilot hole. Right-hand cut and right-hand flute orientation are standard for conventional CNC spindle setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAlTiN coating for elevated heat resistance and extended tool life in high-temperature alloys\u003c\/li\u003e\n  \u003cli\u003e38-degree spiral flute helix for efficient chip evacuation and reduced cutting forces\u003c\/li\u003e\n  \u003cli\u003eVariable index geometry reduces harmonic vibration during aggressive cuts\u003c\/li\u003e\n  \u003cli\u003eCentercutting design permits direct plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate delivers superior edge retention and rigidity\u003c\/li\u003e\n  \u003cli\u003eExtra-long classification with 3 inch length of cut for deep-pocket and extended-reach work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eRated for workpiece materials in categories H (hardened steels), K (cast irons), M (stainless steels), P (carbon and alloy steels), and S (superalloys and high-temp alloys). Straight-cylindrical shank is compatible with standard 0.5 inch collet chucks, end mill holders, and shrink-fit tooling systems used in CNC machining centers and manual knee mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Ensure the machine spindle is fully stopped and the tool changer or quill is locked before inserting or removing the end mill. Verify that the collet or holder bore is clean and free of chips before seating the shank, and confirm runout with a dial indicator before beginning production cuts. Follow the tooling manufacturer and machine builder guidelines for maximum spindle speed, feed rate, and depth of cut for the specific workpiece material and setup.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00043 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Extra Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 7\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 70483\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51743947915570,"sku":"70483","price":215.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/addf95ea968c9bc23904ebb487c28625_a0a97135-f711-45e0-bf58-413bc1eed8bc.jpg?v=1788851756","url":"https:\/\/voomisupply.com\/products\/sgs-70483-square-end-mill-0-5in-4-flute-solid-carbide-altin","provider":"Voomi Supply","version":"1.0","type":"link"}