{"product_id":"sgs-56113-straight-flute-drill-bit-13-64-in-carbide","title":"Sgs 56113 Straight-flute Drill Bit 13\/64 in Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 56113 is a straight-flute drill bit machined from solid micrograin carbide and intended for precision drilling in ferrous metals and hardened materials. The bit measures 0.2031 inches (13\/64 inches) in diameter with a 140-degree point angle and a web-thinned tip geometry that reduces thrust and improves hole entry. Overall length is 2.25 inches, with a flute length of 1.1875 inches. The bright, uncoated finish is standard for solid carbide applications where coating compatibility or regrinding flexibility is a priority. This is a Series 106 tool conforming to DIN 6539 standards, suited for machinists, toolroom technicians, and precision fabricators working on close-tolerance applications.\u003c\/p\u003e\n\u003cp\u003eThe SGS 56113 is designed for drilling cast iron, hardened steel, and general steel workpieces. Its straight-flute geometry makes it particularly effective in materials that produce short, chippy swarf rather than long stringy chips, preventing chip packing in the flutes. The 3xD flute-to-diameter ratio and right-hand cutting direction are consistent with standard drill press, CNC machining center, and manual mill setups. Coolant-through is not supported on this tool, so surface-applied cutting fluid or mist coolant is appropriate when drilling harder grades of steel or hardened materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for hardness and wear resistance in ferrous metals\u003c\/li\u003e\n  \u003cli\u003e140-degree point angle with web-thinned tip reduces entry thrust and improves centering\u003c\/li\u003e\n  \u003cli\u003eStraight-flute design suited for cast iron, hardened steel, and other short-chipping materials\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish maintains dimensional accuracy and supports regrinding\u003c\/li\u003e\n  \u003cli\u003eDiameter tolerance held to +0.0000 to -0.0005 inches for close-fit hole applications\u003c\/li\u003e\n  \u003cli\u003eConforms to DIN 6539 standard; Series 106\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on cast iron, hardened steel, and general steel workpieces as specified by the manufacturer. Compatible with standard drill chucks accepting a 0.2031-inch straight shank. Suitable for use in drill presses, CNC machining centers, and manual milling machines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed by a machinist or toolroom technician into a collet or keyless chuck that matches the 0.2031-inch shank diameter. Secure the workpiece firmly before drilling to prevent movement and bit breakage, which is a particular risk with solid carbide tooling. Because coolant-through is not supported, apply cutting fluid directly to the drill point or use mist coolant when working hardened or abrasive materials. Inspect the tip for chipping before each use; solid carbide is brittle and should not be used in hand-held drills or applications with significant lateral load.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 13\/64 inches (0.2031 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.1875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2031 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.117 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 0.953 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute-to-Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Micrograin Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Hardened Steel, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Hardened Materials\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 106\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 6539\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 56113\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51728225599794,"sku":"56113","price":63.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3a5ab9b32a76cb0bb80c3168dca88fb3.jpg?v=1788689875","url":"https:\/\/voomisupply.com\/products\/sgs-56113-straight-flute-drill-bit-13-64-in-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}