{"product_id":"sgs-56106-straight-flute-carbide-drill-bit-3-32-inch","title":"Sgs 56106 Straight-flute Carbide Drill Bit 3\/32 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 56106 is a straight-flute carbide drill bit designed for precision drilling in hard and abrasive materials. Built from micrograin carbide with a bright uncoated finish, this bit features a 140-degree standard point angle and a web-thinned geometry that reduces thrust and improves centering on entry. The 3\/32 inch diameter (0.0938 inches decimal) pairs with a 3\/4 inch flute length and a 1-3\/4 inch overall length, making it well suited for short, controlled holes in tight workspaces. Right-hand cutting direction, two flutes, and DIN 6539 construction standards round out a tool built for reliable performance in demanding materials.\u003c\/p\u003e\u003cp\u003eThis drill bit is intended for use on cast iron, hardened steel, and other hardened materials where standard high-speed steel tooling underperforms or fails prematurely. The straight-flute design is preferred over spiral flutes when chip evacuation is less critical and rigidity is the priority, such as when drilling brittle or hard materials. Typical applications include maintenance and repair work, precision metalworking, and toolroom operations where tight diameter tolerances are required. The 3xD flute-to-diameter ratio and 0.609 inch maximum drilling depth make this bit suitable for shallow, accurate holes rather than deep-bore work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMicrograin carbide construction for extended tool life in hardened and abrasive materials\u003c\/li\u003e\n\u003cli\u003e140-degree standard point angle with web-thinned geometry for improved entry and reduced thrust\u003c\/li\u003e\n\u003cli\u003eStraight-flute design provides added rigidity when drilling cast iron and hardened steel\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish maintains sharp cutting edge without coating buildup concerns\u003c\/li\u003e\n\u003cli\u003eDiameter tolerance of +0.0000 to -0.0005 inches for consistent, precise hole sizing\u003c\/li\u003e\n\u003cli\u003eMeets DIN 6539 construction standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on cast iron, hardened steel, and hardened materials in applications requiring a 3\/32 inch straight-flute carbide drill bit conforming to DIN 6539 Series 106 specifications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tool is installed by machinists and maintenance technicians using a drill press, CNC machine, or hand drill with an appropriate collet or chuck rated for the 0.0938 inch shank diameter. Secure the workpiece firmly before drilling and verify spindle speed matches the recommended surface footage for carbide tooling in the target material. Coolant-through is not supported on this bit; use external coolant or cutting fluid appropriate for the workpiece material if needed. Inspect the cutting edges before each use and remove the bit from service if chipping or wear is visible.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 3\/32 inches (0.0938 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3\/4 inches (0.7500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-3\/4 inches (1.7500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0938 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.0500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 0.6090 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Micrograin Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Hardened Steel, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Hardened Materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 106\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 6539\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.08 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 56106\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51744807026994,"sku":"56106","price":41.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/636f3c246f76f736d24bdeae3fbcf0f0.jpg?v=1788860735","url":"https:\/\/voomisupply.com\/products\/sgs-56106-straight-flute-carbide-drill-bit-3-32-inch","provider":"Voomi Supply","version":"1.0","type":"link"}