{"product_id":"sgs-51585-solid-carbide-jobber-drill-bit-5-32-in-145-deg","title":"Sgs 51585 Solid Carbide Jobber Drill Bit 5\/32 in 145 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 51585 is a solid carbide jobber-length drill bit designed for high-performance drilling in demanding materials. It carries an AlTiN (Ti-NAMITE-A) coating and a 145-degree split-point geometry with web thinning, which reduces thrust force at entry and promotes self-centering without a center punch. The 5\/32-inch (0.1562-inch decimal) cutting diameter is paired with a 1\/4-inch straight cylindrical shank, allowing use in standard chucks. With 2 regular spiral flutes and a 5xD flute-to-diameter ratio, the bit handles chip evacuation efficiently in tough alloys. Licensed HVAC and mechanical contractors, machinists, and tool-and-die tradespeople commonly reach for this geometry when drilling temperature-resistant alloys and titanium.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is built for production and precision work in titanium and temperature-resistant alloys where standard HSS tooling fails prematurely. The AlTiN coating adds heat resistance and surface hardness, making it appropriate for dry or minimal-lubrication cutting strategies. The Series 135 designation places it in SGS's high-performance carbide lineup. The 3-1\/4-inch overall length and 1-1\/4-inch flute length suit typical jobber-length hole depths up to approximately 1-5\/64 inches. It is sold individually and fits into standard CNC, drill press, and hand-held setups accepting a 1\/4-inch shank.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard, abrasive workpiece materials\u003c\/li\u003e\n  \u003cli\u003eAlTiN (Ti-NAMITE-A) coating improves heat resistance and extends tool life in titanium and temperature alloys\u003c\/li\u003e\n  \u003cli\u003e145-degree split-point angle with web thinning for self-centering entry and reduced thrust\u003c\/li\u003e\n  \u003cli\u003eTapered web configuration with regular spiral flutes promotes consistent chip evacuation\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch straight cylindrical shank fits standard drill chucks and collet holders\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, 2-flute design compatible with conventional CNC and manual drilling setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a high-performance replacement or production drill bit for applications involving titanium and temperature-resistant alloys; accepts any standard chuck or collet holder sized for a 1\/4-inch straight shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or tradespeople familiar with carbide tooling. Carbide is brittle — avoid side-loading, interrupted cuts without proper setup, or drop impacts that can chip the cutting edge. Ensure the workpiece is securely fixtured and the spindle speed and feed rate are set appropriately for solid carbide in the target material before engaging the cut. Coolant-through is not supported on this bit; use flood coolant or air blast at the entry point when process conditions allow.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 5\/32 inches (0.1562 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter (mm)\u003c\/strong\u003e: 3.97 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 145 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN (Ti-NAMITE-A)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.25 inches (3-1\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.25 inches (1-1\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches (1\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1-15\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 1-5\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Self-Centering\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Temperature Alloy, Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: 0.0002 to 0.0006 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 135\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 51585\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51727258976562,"sku":"51585","price":269.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1f76b44f7e34536204d68c01d9f26669.jpg?v=1788675568","url":"https:\/\/voomisupply.com\/products\/sgs-51585-solid-carbide-jobber-drill-bit-5-32-in-145-deg","provider":"Voomi Supply","version":"1.0","type":"link"}