{"product_id":"sgs-48511-square-end-mill-0-315in-4-flute-solid-carbide","title":"Sgs 48511 Square End Mill 0.315in 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 48511 is a solid carbide square end mill designed for precision milling in a wide range of metalworking applications. Built to Series 1M specifications, it features a 0.315-inch (8 mm) cutting diameter, a 0.7874-inch (20 mm) length of cut, and a 4-flute spiral geometry with a 30-degree helix angle. The titanium nitride (TiN) coating improves surface hardness and wear resistance, extending tool life in demanding cuts. The micrograin carbide substrate provides rigidity and edge retention. Right-hand cut and right-hand flute orientation are standard for conventional milling machine setups. Installed by machinists and CNC operators in job shop and production environments.\u003c\/p\u003e\u003cp\u003eThe SGS 48511 is suited for milling operations on a broad range of workpiece materials, including cast iron, non-ferrous metals, steel, stainless steel, high-temperature alloys, and hardened materials corresponding to material codes H, K, M, N, P, and S. The straight cylindrical shank accepts standard collet chucks and end mill holders. The regular-length profile fits most vertical machining centers and manual knee mills where reach is not a limiting factor. This tool is center-cutting, allowing plunge entry as well as conventional side milling and slotting operations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.315-inch (8 mm) cutting diameter with mill diameter tolerance of +0.000 \/ -0.050 mm\u003c\/li\u003e\n\u003cli\u003e4-flute spiral geometry with 30-degree helix for balanced chip evacuation\u003c\/li\u003e\n\u003cli\u003eTitanium nitride (TiN) coating for increased wear resistance and tool life\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide construction for rigidity and sharp edge retention\u003c\/li\u003e\n\u003cli\u003eCenter-cutting design supports plunge milling and slot entry\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand flute  -  compatible with standard CNC and manual mill spindle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard collet chucks and end mill holders accepting an 8 mm (0.315-inch) straight cylindrical shank. Suitable for material groups H, K, M, N, P, and S as designated in the supplier specifications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Ensure the machine spindle is fully stopped and locked out before changing tooling. Seat the shank to the recommended insertion depth in the collet or holder and torque the retention mechanism per the toolholder manufacturer's specifications. Verify runout with a dial indicator before beginning cuts, as excessive runout accelerates edge wear and reduces surface finish quality.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.315 inches (8 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.7874 inches (20 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.315 inches (8 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 63 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.050 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.009 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.33 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 48511\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51743087034674,"sku":"48511","price":64.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d1fadfafaa1b1399170d1f68a383c816_dee85273-9859-47b1-abc9-3792bea3b534.jpg?v=1788842490","url":"https:\/\/voomisupply.com\/products\/sgs-48511-square-end-mill-0-315in-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}