{"product_id":"sgs-43448-corner-radius-end-mill-6mm-3-flute-solid-carbide","title":"Sgs 43448 Corner Radius End Mill 6mm 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 43448 is a solid carbide corner radius end mill engineered for high-performance material removal in steel, stainless steel, cast iron, superalloys, and titanium. It features a 6 mm cutting diameter, an 18 mm length of cut, and a 0.5 mm corner radius that reduces stress concentration at the tool tip and extends cutting edge life. The variable helix geometry helps break up harmonics during aggressive cuts, reducing chatter and improving surface finish. The AlTiN coating — marketed under the Ti-NAMITE-A designation — provides thermal resistance and hardness retention at elevated cutting temperatures. This tool is intended for use by machinists and toolroom professionals in production and job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThe 43448 is suited for roughing operations in ferrous and difficult-to-machine materials including superalloys and titanium. Its coarse pitch, right-hand cut, and right-hand flute direction make it appropriate for conventional milling setups. The 6 mm straight cylindrical shank is compatible with standard end mill holders. With a 57 mm overall length and long length-of-cut classification, it handles deeper pockets and slots where a standard-length tool would not reach. Secondary workpiece capability extends to hard materials, broadening its utility across a range of part programs.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eVariable helix geometry reduces chatter and harmonics during roughing passes\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating (Ti-NAMITE-A) delivers thermal hardness retention for ferrous and superalloy cutting\u003c\/li\u003e\n  \u003cli\u003e0.5 mm corner radius reduces tool tip stress and prolongs edge life compared to sharp-corner end mills\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eCoarse pitch flute design promotes chip evacuation in deep slots and pockets\u003c\/li\u003e\n  \u003cli\u003eSingle-end, centercutting-capable geometry supports plunge entry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard end mill holders accepting a 6 mm straight cylindrical shank. Primary workpiece materials are steel, stainless steel, cast iron, and superalloys including titanium; secondary application extends to hard materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall in a clean, properly sized end mill holder and torque the clamping mechanism per the holder manufacturer specification before use. Confirm runout at the tool tip with a dial indicator before beginning cuts, as excess runout accelerates edge wear on small-diameter carbide tools. Do not use in side-lock holders that rely on a flat ground on the shank unless the shank is so prepared. Follow your machine tool builder guidelines for spindle speed and feed rate when engaging superalloys or hardened workpieces.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 6 mm (0.2362 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 18 mm (1.7717 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 57 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 6 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.5 mm (0.0197 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin grade)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN (Ti-NAMITE-A)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: Variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Coarse\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0300 to 0.0000 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: -0.0500 to 0.0000 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 33MCR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys and Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 43448\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51733450326322,"sku":"43448","price":66.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0cc63e08eaab4c02447c76f153b6c6b9_e8d43f8a-e165-47e5-913e-472fea0276e5.jpg?v=1788755561","url":"https:\/\/voomisupply.com\/products\/sgs-43448-corner-radius-end-mill-6mm-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}