{"product_id":"sgs-39363-square-end-mill-1-2-in-2-flute-solid-carbide-tin","title":"Sgs 39363 Square End Mill 1\/2 in 2 Flute Solid Carbide Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 39363 is a solid carbide square end mill designed for precision milling operations in metalworking and machining applications. It features a 0.5 inch mill diameter with a 1 inch length of cut and a 30-degree helix angle that promotes efficient chip evacuation and smooth cutting action. The tool is TiN coated, which extends tool life by increasing surface hardness and reducing friction during cutting. With 2 flutes and a right-hand cutting and flute direction, it is suited for general-purpose slotting, profiling, and peripheral milling. It is centercutting, allowing plunge entry into the workpiece. Micrograin carbide construction delivers the hardness and wear resistance needed in demanding production environments.\u003c\/p\u003e\n\u003cp\u003eThis end mill is built for use in CNC machining centers and manual mills where tight tolerances and consistent performance are required. The straight cylindrical shank diameter of 0.5 inches fits standard collet chucks and end mill holders commonly found in shop environments. Its regular length designation and 3 inch overall length make it well-suited for general-purpose work in steel, stainless steel, cast iron, non-ferrous metals, and high-temperature alloys, consistent with the primary workpiece material codes listed for this tool.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.5 inch mill diameter with mill diameter tolerance of +0.000\/-0.002 inches for predictable sizing\u003c\/li\u003e\n  \u003cli\u003e1 inch length of cut in micrograin solid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes chip evacuation in spiral flute geometry\u003c\/li\u003e\n  \u003cli\u003eTiN coating increases surface hardness and extends tool life\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute direction for standard spindle compatibility\u003c\/li\u003e\n  \u003cli\u003eShank diameter tolerance of -0.0001\/-0.0004 inches for secure tool holding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 0.5 inch collet chucks, end mill holders, and tool holders on CNC machining centers and manual knee mills. Compatible with primary workpiece material codes H, K, M, N, P, and S, covering a range that includes hardened materials, cast iron, stainless steel, non-ferrous metals, steel, and high-temperature alloys.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician following shop safety procedures. Ensure the machine spindle is fully stopped and the tool holder is clean and free of debris before seating the shank. Torque the collet or set screw to the tool holder manufacturer specifications. Verify runout at setup before engaging the workpiece to protect both the tool and the part.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000\/-0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001\/-0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 39363\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51732738408754,"sku":"39363","price":105.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/826dda01f5f651b0cb26a992a41be89a.jpg?v=1788746176","url":"https:\/\/voomisupply.com\/products\/sgs-39363-square-end-mill-1-2-in-2-flute-solid-carbide-tin","provider":"Voomi Supply","version":"1.0","type":"link"}