{"product_id":"sgs-39359-square-end-mill-15-32-in-2-flute-solid-carbide","title":"Sgs 39359 Square End Mill 15\/32 in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 39359 is a solid carbide square end mill designed for precision milling in a wide range of metalworking applications. It features a 15\/32 inch (0.4688 inch) cutting diameter, a 1 inch length of cut, and a 1\/2 inch straight-cylindrical shank. The two-flute, right-hand spiral design with a 30-degree helix angle promotes efficient chip evacuation and clean edge geometry. A titanium nitride (TiN) finish provides added surface hardness and wear resistance. Built from micrograin solid carbide, this end mill delivers consistent dimensional accuracy within a mill diameter tolerance of plus 0.000 \/ minus 0.002 inches. It is centercutting, allowing for direct plunge entry. Licensed machinists and CNC operators are the primary users of this tool.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for general-purpose milling operations including slotting, profiling, and peripheral milling. With an overall length of 3 inches and a regular-length classification, it fits standard toolholders used in vertical machining centers and manual knee mills. The SGS 39359 is rated for use across multiple workpiece material categories including cast iron, non-ferrous metals, stainless steel, high-temperature alloys, and steel — corresponding to material codes H, K, M, N, P, and S. It is not an extended-reach tool, making it best suited for shallow-to-moderate depth applications where rigidity is a priority.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCentercutting design allows direct plunge milling without a pilot hole\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide construction for hardness and wear resistance\u003c\/li\u003e\n\u003cli\u003eTiN coating adds surface durability and reduces friction at the cutting edge\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes smooth chip flow in spiral flute configuration\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute for use in standard spindle rotation\u003c\/li\u003e\n\u003cli\u003eMill diameter tolerance of plus 0.000 \/ minus 0.002 inches for precise fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with workpiece materials classified under codes H (hardened materials), K (cast iron), M (stainless steel), N (non-ferrous metals), P (steel), and S (high-temperature alloys and titanium). Fits any standard 1\/2 inch collet or toolholder.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator following shop-standard tool-change procedures. Ensure the machine spindle is fully stopped and the tool is secured in a clean, appropriately sized collet or end mill holder before tightening. Verify runout with a dial indicator after mounting to confirm seating. Do not exceed the recommended depth of cut for a two-flute end mill geometry, as reduced flute count increases chip load per tooth at aggressive feed rates.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 15\/32 inch (0.4688 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiN (Titanium Nitride)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: plus 0.000 \/ minus 0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: minus 0.0001 \/ minus 0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 39359\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51747479912754,"sku":"39359","price":136.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a672e10575632fa4a0bdefb6762549c9_dfe9a221-f337-463c-abda-58d15f4ee8e9.jpg?v=1788881182","url":"https:\/\/voomisupply.com\/products\/sgs-39359-square-end-mill-15-32-in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}