{"product_id":"sgs-36625-square-end-mill-3-4-in-11-flute-solid-carbide","title":"Sgs 36625 Square End Mill 3\/4 in 11 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 36625 is a solid carbide square end mill designed for high-performance milling in demanding machining environments. With a 0.75 inch mill diameter, 1.625 inch length of cut, and 11 flutes, this tool delivers fine surface finishes and efficient chip evacuation in difficult-to-machine materials. The AlTiN coating provides thermal resistance and wear protection, extending tool life in high-speed dry or semi-dry cutting applications. A 35-degree helix angle promotes smooth cutting action and reduces chatter. The micrograin carbide substrate supports rigidity and edge retention across a broad range of workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThe SGS 36625 is suited for milling hardened steels, stainless steels, cast iron, titanium, and high-temperature alloys — corresponding to primary workpiece material codes H, K, M, P, and S. The centercutting geometry allows plunge entry, and the right-hand cut with right-hand spiral flute configuration is standard for vertical and horizontal CNC machining centers. This is a regular-length tool appropriate for general-purpose pocketing, slotting, profiling, and finishing operations where a multi-flute carbide end mill is specified.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e11-flute design for improved surface finish and higher feed rates in finishing applications\u003c\/li\u003e\n  \u003cli\u003eAlTiN finish provides heat and oxidation resistance for dry and high-speed machining\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate delivers rigidity and sharp, durable cutting edges\u003c\/li\u003e\n  \u003cli\u003e35-degree helix angle reduces cutting forces and minimizes vibration\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry enables direct plunge entry without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank with h6 tolerance for consistent tool holding in standard collets and end mill holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with workpiece materials classified under codes H, K, M, P, and S, including hardened steels, cast irons, stainless steels, titanium alloys, and high-temperature alloys. Fits standard 3\/4 inch collets and end mill holders on CNC machining centers accepting a straight-cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC setup technician. Always power down and lock out the spindle before changing tooling. Seat the shank fully into the tool holder and torque the collet nut to the tool holder manufacturer specification. Verify runout with a dial indicator before beginning a cut, as excessive runout accelerates edge wear on multi-flute tools.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 11\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 35 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0020 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 66\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36625\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51732851491122,"sku":"36625","price":432.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e9070cd87823e8e1bbefc677c1110ebe_47785c8b-1dee-4aee-a375-f912782c5658.jpg?v=1788747530","url":"https:\/\/voomisupply.com\/products\/sgs-36625-square-end-mill-3-4-in-11-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}