{"product_id":"sgs-36620-square-end-mill-3-16-in-7-flute-solid-carbide","title":"Sgs 36620 Square End Mill 3\/16 in 7 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 36620 is a 7-flute solid carbide square end mill engineered for high-performance milling in demanding materials. It carries an AlTiN coating and a 35-degree spiral flute geometry that supports aggressive chip evacuation and heat resistance at the cutting zone. The 3\/16 inch diameter and 5\/8 inch length of cut make it well suited for finishing and semi-finishing passes in tight pockets and slots. Built from micrograin carbide stock, this is a right-hand cut, right-hand flute, centercutting tool rated for use across a broad range of workpiece material classes. Machinists and tool-and-die professionals select this geometry when tool deflection and surface finish tolerance are the primary concerns.\u003c\/p\u003e\u003cp\u003eThe SGS 36620 is designed for use in CNC machining centers and manual knee mills where a straight-cylindrical shank is required. Primary workpiece material codes listed are H, K, M, P, and S, covering hardened steels, cast irons, stainless steels, carbon and alloy steels, and high-temperature superalloys. The regular-length body and 2 inch overall length fit standard collet and end mill holder setups without requiring extended reach tooling. It is sold individually and is a single-end tool, meaning it is replaced rather than reground when worn.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e7-flute geometry increases radial contact and improves surface finish at higher feed rates\u003c\/li\u003e\n\u003cli\u003eAlTiN finish provides oxidation resistance and maintains hardness at elevated cutting temperatures\u003c\/li\u003e\n\u003cli\u003e35-degree helix angle promotes smooth chip flow and reduced cutting forces\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate delivers edge strength and wear resistance\u003c\/li\u003e\n\u003cli\u003eMill diameter tolerance of plus 0.0000 to minus 0.0020 inches supports close-tolerance work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a straight-cylindrical shank end mill compatible with standard ER collets, end mill holders, and milling chucks sized for 3\/16 inch shank tooling.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a machinist or CNC setup technician. Secure the shank in a clean, properly sized collet or holder and torque to the holder manufacturer's specification before cutting. Verify spindle runout is within acceptable limits before engaging the workpiece, as runout accelerates wear on small-diameter carbide tools. Never use this tool in a worn or undersized collet that cannot maintain consistent shank grip.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/16 inches (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 5\/8 inches (0.6250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inches (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 35 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material Codes\u003c\/strong\u003e: H, K, M, P, S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: plus 0.0000 to minus 0.0020 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36620\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51732031832370,"sku":"36620","price":77.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/17bafb9951653db3acf6ea91b7b52ad3_7530bbb8-51e7-47cd-9db5-a12d926795a1.jpg?v=1788738408","url":"https:\/\/voomisupply.com\/products\/sgs-36620-square-end-mill-3-16-in-7-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}