{"product_id":"sgs-35669-corner-radius-end-mill-1-4-in-3-flute-carbide","title":"Sgs 35669 Corner Radius End Mill 1\/4 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 35669 is a solid carbide corner radius end mill designed for precision milling of non-ferrous metals. Part of the SGS Series 43CR, it features a 1\/4 inch diameter, a 3\/4 inch length of cut, and a 0.015 inch corner radius that reduces stress concentration at the cutting edge and extends tool life. The TiB2 (Ti-NAMITE-B) coating improves surface hardness and reduces built-up edge on aluminum and other non-ferrous workpieces. With 3 right-hand helical flutes at a high helix angle of 38 degrees and a coarse pitch, this end mill is configured for roughing material removal. Overall length is 2.5 inches with a 1\/4 inch straight cylindrical shank. Installed in end mill holders by machinists and tool-and-die professionals in CNC machining centers and manual mills.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for roughing operations on non-ferrous metals including aluminum, brass, and copper alloys. The single-end, center-cutting design allows plunge entry and profiling in a single setup. The 3-flute configuration balances chip evacuation with rigidity, making it appropriate for high-speed milling where chip load and surface finish on non-ferrous substrates are priorities. It is intended for use with standard end mill holders and is not recommended for ferrous or hardened steel applications given its TiB2 coating and non-ferrous material designation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.015 inch corner radius reduces edge chipping and extends cutter life in high-feed roughing passes\u003c\/li\u003e\n  \u003cli\u003eTiB2 (Ti-NAMITE-B) coating provides high surface hardness and low affinity for aluminum adhesion\u003c\/li\u003e\n  \u003cli\u003e3 right-hand helical flutes at 38-degree high helix angle for efficient chip evacuation in non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003eCoarse pitch geometry optimized for roughing and aggressive material removal rates\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction delivers rigidity and heat resistance at elevated cutting speeds\u003c\/li\u003e\n  \u003cli\u003e1\/4 inch straight cylindrical shank with h6 tolerance for accurate seating in end mill holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard end mill holders. Primary workpiece material designation is non-ferrous metal (material code N). Not intended for ferrous or hardened workpiece materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists using standard end mill holders on CNC or manual milling equipment. Ensure the spindle is fully powered down and locked before changing tooling. Seat the shank fully into the holder and torque the set screw or collet to the holder manufacturer's specification. Verify runout with a dial indicator after installation before beginning any cutting pass.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0150 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: -0.0020 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0004 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: High\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Coarse\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Configuration\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiB2 (Ti-NAMITE-B)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 43CR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 35669\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51741220045106,"sku":"35669","price":77.33,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6de429704c05bc7a38d3dde2ef2988ab_f3ba10ff-7f39-4506-b762-561860b14ca6.jpg?v=1788830128","url":"https:\/\/voomisupply.com\/products\/sgs-35669-corner-radius-end-mill-1-4-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}