{"product_id":"sgs-35487-square-end-mill-7-16-inch-4-flute-solid-carbide","title":"Sgs 35487 Square End Mill 7\/16 Inch 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 35487 is a solid carbide square end mill designed for precision milling operations in metalworking and machining environments. With a 7\/16-inch cutting diameter and a 1-inch length of cut, this four-flute tool delivers efficient material removal and a smooth finish on ferrous and non-ferrous workpieces. The 30-degree helix angle promotes chip evacuation and reduces cutting forces. The uncoated solid carbide construction provides rigidity and wear resistance in a wide range of materials. This end mill is installed and operated by machinists and CNC programmers in job shop, toolroom, and production environments.\u003c\/p\u003e\u003cp\u003eThe SGS 35487 is suited for slotting, profiling, and peripheral milling operations in vertical and horizontal machining centers as well as manual milling machines. Its centercutting geometry allows for plunge entry, giving operators flexibility in toolpath strategy. The right-hand cut and right-hand spiral flute configuration is the standard setup for conventional milling machines and CNC machining centers. A 7\/16-inch shank diameter matches directly to ER collets, end mill holders, and milling chucks of the same bore size, keeping runout minimal.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and extended tool life in demanding cuts\u003c\/li\u003e\n\u003cli\u003eFour flutes with a 30-degree helix angle for efficient chip evacuation and surface finish\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand spiral flute — standard orientation for CNC and manual mills\u003c\/li\u003e\n\u003cli\u003eUncoated finish suitable for use with cutting fluids across a broad material range\u003c\/li\u003e\n\u003cli\u003eConsistent 7\/16-inch shank diameter for direct fitment in standard collet and end mill holder systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard ER collet chucks, end mill holders, and milling chucks with a 7\/16-inch bore, compatible with vertical and horizontal CNC machining centers and manual knee mills accepting a 7\/16-inch shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Secure the shank to the full recommended engagement depth in the tool holder and torque the retention mechanism per the holder manufacturer specifications before initiating any cut. Inspect the collet or end mill holder for wear, contamination, or damage before seating the tool, as these conditions increase runout and reduce tool life. Never exceed the manufacturer-rated speeds and feeds for the workpiece material and depth of cut being applied.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 7\/16 inches (0.4375 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 7\/16 inches (0.4375 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00035 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 54\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 35487\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51736551031090,"sku":"35487","price":104.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/05a6f3edfa69eb8a29cbf7cb9627a4bd.jpg?v=1788778614","url":"https:\/\/voomisupply.com\/products\/sgs-35487-square-end-mill-7-16-inch-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}