{"product_id":"sgs-35485-square-end-mill-3-8-inch-4-flute-solid-carbide","title":"Sgs 35485 Square End Mill 3\/8 Inch 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 35485 is a solid carbide square end mill designed for precision milling in non-ferrous metal applications. With a 3\/8 inch cutting diameter and four spiral flutes, it delivers clean, accurate cuts in aluminum, brass, copper, and similar materials. The centercutting geometry allows both plunge and peripheral milling. A 30-degree helix angle promotes efficient chip evacuation and helps maintain surface finish quality. This tool is intended for use by machinists and tooling professionals running CNC mills or manual knee mills in production and job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThe SGS 35485 fits standard 3\/8 inch straight-shank tool holders and collets. It is suited for light-to-moderate material removal in non-ferrous metals. The regular-length body — 7\/8 inch length of cut and 2-1\/2 inch overall length — keeps deflection low in typical profiling, slotting, and contouring operations. The uncoated solid carbide construction is well matched to non-ferrous workpieces where coatings such as TiN or TiAlN are not required or may cause built-up edge.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in non-ferrous machining\u003c\/li\u003e\n  \u003cli\u003eFour spiral flutes with 30-degree helix angle for efficient chip removal\u003c\/li\u003e\n  \u003cli\u003eCentercutting design enables plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute configuration matches standard spindle rotation\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard collet chucks and end mill holders\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suited for aluminum and other non-ferrous metals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in 3\/8 inch collet chucks, end mill holders, or set-screw holders on CNC machining centers and manual mills. Primary workpiece material designation is non-ferrous metal (Material Code N). Part of SGS Series 54 regular-length square end mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and locked out before inserting or removing the tool. Seat the shank fully into the holder to the recommended engagement depth and torque set screws or collet nuts per the tool holder manufacturer specifications. Confirm runout with a dial indicator before beginning the cut — excessive runout in solid carbide tooling accelerates chipping and premature tool failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 7\/8 inch (0.8750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00035 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 54\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 35485\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51747116843314,"sku":"35485","price":72.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a1b21d2a37cd9e1f07ebea3071d68e17.jpg?v=1788876356","url":"https:\/\/voomisupply.com\/products\/sgs-35485-square-end-mill-3-8-inch-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}