{"product_id":"sgs-35302-square-end-mill-1-8-in-2-flute-solid-carbide-ticn","title":"Sgs 35302 Square End Mill 1\/8 in 2 Flute Solid Carbide Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 35302 is a square end mill engineered for precise milling operations in non-ferrous metal applications. Built from solid carbide with a titanium carbonitride (TiCN) finish, this tool delivers hardness and wear resistance suited to high-speed cutting in aluminum, brass, copper, and similar materials. The 2-flute spiral design promotes efficient chip evacuation in softer, gummier materials where flute count matters. At 0.125 inches in diameter with a 0.4375-inch length of cut and 1.5-inch overall length, this is a compact tool intended for slot milling, profiling, and finish passes in tight geometries. Centercutting capability allows direct plunge entry without a pre-drilled pilot hole.\u003c\/p\u003e\n\u003cp\u003eThis end mill is designed for use in CNC machining centers and manual mills where fine detail work on non-ferrous metals is required. The straight cylindrical shank at 0.125 inches fits standard collet chucks and end mill holders. The right-hand cut with right-hand flute spiral is the conventional configuration compatible with standard spindle rotation. Its regular-length classification makes it a general-purpose choice for production and job-shop environments where rigidity and repeatability are priorities.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and extended tool life in non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003eTiCN coating improves surface hardness and reduces built-up edge on aluminum and copper alloys\u003c\/li\u003e\n  \u003cli\u003e2-flute spiral geometry promotes chip clearance in softer, high-chip-volume materials\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge milling without a starter hole\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle balances cutting efficiency with lateral stability at small diameters\u003c\/li\u003e\n  \u003cli\u003eTight mill diameter tolerance of plus 0.000 \/ minus 0.002 inches ensures consistent slot width\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose replacement or standard tooling selection for 1\/8-inch collet and end mill holder setups used in non-ferrous metal milling. Suitable for aluminum, brass, copper, and similar N-class workpiece materials per the SGS Series 52 designation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully stopped and locked before inserting or removing the tool from the collet or holder. Confirm collet bore size matches the 0.125-inch shank diameter before tightening to prevent runout. Set appropriate feed rates and spindle speeds for the specific non-ferrous material being cut; consult SGS Series 52 cutting data for recommended parameters.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.4375 inches (7\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: plus 0.000 \/ minus 0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: plus 0.00000 \/ minus 0.00032 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 52\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 35302\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51729344954674,"sku":"35302","price":37.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/08415b9a30b7f4fa389cf6119c2153aa.jpg?v=1788703265","url":"https:\/\/voomisupply.com\/products\/sgs-35302-square-end-mill-1-8-in-2-flute-solid-carbide-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}