{"product_id":"sgs-34866-square-end-mill-0-5in-3-flute-solid-carbide","title":"Sgs 34866 Square End Mill 0.5in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 34866 is a solid carbide square end mill designed for high-performance material removal in non-ferrous metal applications. With a 0.5 inch cutting diameter and a 1.625 inch length of cut, this three-flute tool delivers efficient chip evacuation and a clean, square shoulder finish. The TiB2 (titanium diboride) coating reduces built-up edge and extends tool life when cutting aluminum, copper, brass, and similar non-ferrous materials. A 38-degree helix angle promotes smooth cutting action and reduces chatter. Installed by machinists and CNC operators in production and job-shop environments, this end mill is suited for slotting, profiling, and peripheral milling operations.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for use on CNC machining centers and manual knee mills where a straight 0.5 inch shank is compatible with the spindle toolholder. Its centercutting geometry allows it to plunge directly into the workpiece as well as perform standard peripheral cuts. The Series 43 designation identifies it within the SGS tooling line as a regular-length, straight-shank configuration optimized for non-ferrous workpiece materials designated by material code N. It is well suited for production runs requiring consistent dimensional accuracy and repeatable surface finish.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction provides rigidity and heat resistance compared to high-speed steel alternatives\u003c\/li\u003e\n\u003cli\u003eTiB2 finish reduces friction and built-up edge when machining non-ferrous metals\u003c\/li\u003e\n\u003cli\u003e38-degree helix angle promotes smooth chip flow and reduced cutting forces\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry into the workpiece\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand spiral flute configuration for standard spindle rotation\u003c\/li\u003e\n\u003cli\u003eMill diameter tolerance of +0.00000 to -0.00043 inches ensures close dimensional control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with standard 0.5 inch straight-shank toolholders including collet chucks, end mill holders, and shrink-fit holders. Primary workpiece material is non-ferrous metal (material code N), including aluminum, brass, copper, and similar alloys.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator following the toolholder manufacturer's clamping torque and runout specifications. Ensure the machine spindle is fully stopped and locked out before inserting or removing the end mill. Confirm shank insertion depth meets the minimum engagement requirement for the toolholder in use. Verify spindle rotation direction is right-hand before initiating a cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiB2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.00000 to -0.00043 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 43\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 4.13 inches L x 0.55 inches W x 0.55 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.016 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 34866\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51741292462386,"sku":"34866","price":201.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/11b08d4f99a54470c8ebde6e2c4afb71.jpg?v=1788830584","url":"https:\/\/voomisupply.com\/products\/sgs-34866-square-end-mill-0-5in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}