{"product_id":"sgs-34744-square-end-mill-5-8-inch-3-flute-solid-carbide","title":"Sgs 34744 Square End Mill 5\/8 Inch 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 34744 is a solid carbide square end mill designed for precise milling of non-ferrous metals including aluminum, brass, copper, and similar materials. It features a 5\/8-inch cutting diameter, a 1-5\/8-inch length of cut, and a 3-3\/4-inch overall length. The three-flute geometry with a 38-degree helix angle promotes efficient chip evacuation at high feed rates. A titanium diboride (TiB2) coating reduces built-up edge and extends tool life in non-ferrous applications. The straight cylindrical shank measures 5\/8 inch in diameter with a close tolerance of +0.00000\/-0.00043 inches, ensuring accurate tool holding in standard milling chucks and collet systems.\u003c\/p\u003e\u003cp\u003eThis end mill suits CNC machining centers and manual knee mills where operators are cutting non-ferrous metals in production or job-shop environments. The regular-length configuration fits standard reach applications without requiring extended tooling. The right-hand cut with right-hand spiral fluting is the conventional setup for most horizontal and vertical milling operations. It is not a center-cutting design, so plunge entry is not recommended; ramp or helical entry should be used instead. Machinists and CNC programmers working in aerospace, automotive, and general fabrication shops will find this tool appropriate for slotting, profiling, and contouring cuts in non-ferrous workpieces.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction provides rigidity and wear resistance compared to HSS alternatives\u003c\/li\u003e\n\u003cli\u003eTiB2 coating reduces friction and built-up edge in non-ferrous metal cuts\u003c\/li\u003e\n\u003cli\u003e38-degree helix angle promotes aggressive chip evacuation in aluminum and similar alloys\u003c\/li\u003e\n\u003cli\u003eThree-flute design balances chip room and cutting edge count for non-ferrous applications\u003c\/li\u003e\n\u003cli\u003eTight shank and cutting diameter tolerances (+0.00000\/-0.00043 inches) support accurate, repeatable setups\u003c\/li\u003e\n\u003cli\u003eNon-center-cutting geometry — suited for side milling, slotting, and profiling with ramp or helical entry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in milling applications with a primary workpiece material classification of non-ferrous metals (material code N). Part of the SGS Series 43 end mill family. Fits any tool holder or collet accepting a 5\/8-inch straight cylindrical shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC technician. Secure the shank in a properly sized collet or end mill holder and torque to the tool holder manufacturer's specification. Because this is a non-center-cutting end mill, do not plunge directly into the workpiece — use a ramping or helical interpolation entry path. Verify runout at the cutting diameter after clamping before beginning a production cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-5\/8 inches (1.6250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiB2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00043 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00043 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 43\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 34744\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51730410996018,"sku":"34744","price":322.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0558638a6c3301edad4b9924d150c5ca_56d1070c-8126-47a0-81c5-94402dba3098.jpg?v=1788716996","url":"https:\/\/voomisupply.com\/products\/sgs-34744-square-end-mill-5-8-inch-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}