{"product_id":"sgs-34712-square-end-mill-1-2-in-3-flute-solid-carbide","title":"Sgs 34712 Square End Mill 1\/2 in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 34712 is a solid carbide square end mill designed for precision milling operations in non-ferrous metals and similar materials. Built to Series 43 specifications, it features a 0.5-inch cutting diameter, a 5\/8-inch length of cut (0.625 inches), and a 38-degree helix angle that promotes efficient chip evacuation and smooth cutting action. The three-flute geometry balances chip load capacity with flute-to-flute rigidity, making it well suited for slotting, profiling, and peripheral milling passes. The straight cylindrical shank measures 0.5 inches in diameter with a tight tolerance of +0.00000 \/ -0.00043 inches for secure toolholder engagement. This is a single-end, uncoated tool with a right-hand cut and right-hand spiral flute.\u003c\/p\u003e\n\u003cp\u003eThe SGS 34712 is intended for milling non-ferrous workpiece materials, including aluminum alloys, copper, brass, and similar materials designated under material code N. Its regular-length body with a 2.5-inch overall length suits standard vertical machining center setups and manual knee mills where clearance is not a constraint. The uncoated carbide substrate performs well in high-speed aluminum roughing and finishing applications where coating buildup or edge adhesion can be a concern. It is not center-cutting, so plunge entry is not recommended without a pre-drilled or pre-bored entry point.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in non-ferrous milling\u003c\/li\u003e\n  \u003cli\u003e38-degree helix angle promotes aggressive chip evacuation and reduces cutting forces\u003c\/li\u003e\n  \u003cli\u003eThree-flute design balances material removal rate with core strength\u003c\/li\u003e\n  \u003cli\u003eTight shank tolerance (+0.00000 \/ -0.00043 inches) ensures consistent toolholder runout\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand spiral flute configuration for standard spindle direction\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suited for aluminum and non-ferrous applications where coating adhesion is undesirable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in non-ferrous metal milling applications (material code N) in vertical machining centers, CNC mills, and manual knee mills accepting a 0.5-inch straight cylindrical shank. Not recommended for ferrous materials or plunge-entry operations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following standard toolholder torque and runout procedures. Secure the straight cylindrical shank in a collet, end mill holder, or hydraulic chuck rated for 0.5-inch shanks, and verify runout before operation. Because this tool is not center-cutting, avoid direct plunge cuts into solid material. Always confirm spindle direction is set to right-hand rotation before engaging the workpiece.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00043 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00043 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 43\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 34712\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51753032057138,"sku":"34712","price":99.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0669baa78ebfafaec8c9dcd83c562ff9_9a8bd09c-f296-44b1-932d-6b15f2ca4029.jpg?v=1788932272","url":"https:\/\/voomisupply.com\/products\/sgs-34712-square-end-mill-1-2-in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}