{"product_id":"sgs-34707-square-end-mill-5-16-inch-3-flute-solid-carbide","title":"Sgs 34707 Square End Mill 5\/16 Inch 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 34707 is a solid carbide square end mill designed for precision milling of non-ferrous metals and similar materials. It features a 5\/16 inch cutting diameter, a 5\/8 inch length of cut, and a 2-1\/2 inch overall length. The three-flute geometry with a 38-degree helix angle promotes efficient chip evacuation and smooth cutting action. The straight cylindrical shank measures 5\/16 inch in diameter, fitting standard collet and end mill holders. This is a single-end, uncoated tool suited for shops and field machinists running high-speed operations on aluminum, brass, copper, and similar non-ferrous workpieces.\u003c\/p\u003e\u003cp\u003eThe SGS 34707 falls within the Series 43 product line and is configured for right-hand cut with right-hand flute direction. It is a regular-length tool, making it a practical choice for standard profiling, slotting, and contouring operations on CNC machining centers and manual mills. The uncoated carbide construction is well suited for non-ferrous applications where coatings may not be necessary or where lubricant-based cutting is preferred. This tool is not center-cutting and is intended for peripheral and side milling rather than plunge entry.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in non-ferrous applications\u003c\/li\u003e\n\u003cli\u003e38-degree helix angle for effective chip evacuation and reduced cutting forces\u003c\/li\u003e\n\u003cli\u003eThree-flute spiral design balances material removal rate with surface finish quality\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction for standard milling setups\u003c\/li\u003e\n\u003cli\u003eTight diameter tolerance of +0.00000 \/ -0.00035 inches for precise fit and consistent results\u003c\/li\u003e\n\u003cli\u003eUncoated finish suited for aluminum, brass, copper, and other non-ferrous metals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a Series 43 SGS solid carbide square end mill for use in standard 5\/16 inch collets and end mill holders on CNC machining centers and manual milling machines processing non-ferrous metals.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and locked out before inserting or removing the tool. Seat the shank fully into a clean, undamaged collet or end mill holder and torque the retention mechanism according to the holder manufacturer specifications. Inspect the cutting edges for chips or wear before each use, as carbide tools can fracture if run in a damaged state.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/16 inch (0.3125 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/16 inch (0.3125 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00035 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00035 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 43\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 34707\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51742796808498,"sku":"34707","price":77.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a441602f0fa32d661190a4b96edd614f.jpg?v=1788839457","url":"https:\/\/voomisupply.com\/products\/sgs-34707-square-end-mill-5-16-inch-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}