{"product_id":"sgs-34682-square-end-mill-0-625-in-2-flute-solid-carbide","title":"Sgs 34682 Square End Mill 0.625 in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 34682 is a solid carbide square end mill designed for precise milling of non-ferrous metals and similar materials. With a 0.625-inch (5\/8 inch) mill diameter and a 0.750-inch length of cut, this tool delivers consistent, accurate results in production and job-shop environments. The TiB2 (titanium diboride) coating reduces friction and helps maintain edge integrity during high-speed cuts. A 35-degree helix angle promotes efficient chip evacuation and smoother cutting action. This is a single-end, centercutting tool, meaning it can plunge directly into a workpiece as well as perform peripheral milling. Machinists and tool-and-die professionals working on CNC machining centers and manual mills use this end mill for slotting, profiling, and pocketing operations.\u003c\/p\u003e\n\u003cp\u003eThe SGS 34682 is intended for use on non-ferrous metals, the primary workpiece material category for Series 47E tooling. Typical applications include aluminum alloys, copper, brass, and similar materials where a sharp, low-friction cutting edge is essential to surface finish quality and dimensional accuracy. The extended reach design, with a 2-3\/8-inch reach length and a 6-inch overall length, allows access to deeper features and recessed areas without requiring a longer-reach extension. The straight-cylindrical shank seats securely in standard ER collets, side-lock holders, and shrink-fit tooling with a matching 0.625-inch bore.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in non-ferrous machining\u003c\/li\u003e\n  \u003cli\u003eTiB2 coating reduces built-up edge and lowers cutting friction on aluminum and copper alloys\u003c\/li\u003e\n  \u003cli\u003e35-degree spiral flute helix promotes efficient chip flow and reduces heat buildup\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute configuration compatible with standard CNC spindle rotation\u003c\/li\u003e\n  \u003cli\u003eExtended reach with 2-3\/8-inch reach length suits deeper pockets and tall workpiece features\u003c\/li\u003e\n  \u003cli\u003e2-flute design maximizes chip clearance in softer, gummy non-ferrous materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and manual mills with toolholders accepting a 0.625-inch straight-cylindrical shank. Optimized for non-ferrous metals per the Series 47E application designation. Mill diameter tolerance is -0.0001 to -0.0004 inches; shank diameter tolerance is +0.00000 to -0.00043 inches.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom professional. Seat the shank fully into the toolholder and verify runout with a dial indicator before cutting. Always confirm spindle direction is set to right-hand rotation before engaging the workpiece. Inspect the cutting edges for chips or wear before each use, as carbide edges are brittle and sensitive to impact damage during handling and storage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.6250 inches (5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.7500 inches (3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.6250 inches (5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 2-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 35 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiB2 (Titanium Diboride)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 to -0.00043 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 47E\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 34682\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51735005004082,"sku":"34682","price":456.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7de0efbdec12bb2c7f357a897f233734_d9254e19-c985-4fd8-bb82-ac815f21c3d0.jpg?v=1788769106","url":"https:\/\/voomisupply.com\/products\/sgs-34682-square-end-mill-0-625-in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}