{"product_id":"sgs-34680-square-end-mill-0-5-in-2-flute-solid-carbide-tib2","title":"Sgs 34680 Square End Mill 0.5 in 2 Flute Solid Carbide Tib2","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 34680 is a single-end, square-profile solid carbide end mill designed for high-efficiency material removal in aluminum and non-ferrous metals. Built to Series 47E specifications, it features a 0.5-inch cutting diameter, a 0.625-inch length of cut, and a 35-degree helix angle that promotes chip evacuation and reduces heat buildup during aggressive cuts. The TiB2 (titanium diboride) coating provides a low-friction surface ideal for gummy non-ferrous materials. With a 6-inch overall length and 2.125-inch reach length, this tool suits setups requiring extended reach without sacrificing rigidity. A micrograin carbide substrate delivers fine edge retention at elevated feed rates. Licensed machinists and CNC operators in production and job-shop environments rely on this geometry for consistent, burr-free results in aluminum alloy work.\u003c\/p\u003e\n\u003cp\u003eThe SGS 34680 is intended for milling aluminum, copper, brass, and other non-ferrous materials where chip welding and built-up edge are primary concerns. The right-hand cut, right-hand spiral flute configuration and center-cutting capability allow plunge entry and full-slot or peripheral milling operations. The straight 0.5-inch shank fits standard ER collet chucks and end mill holders on vertical machining centers and CNC routers. Extended-reach geometry makes it suitable for deeper pockets and tall workpiece profiles where a standard-length tool cannot reach the floor of the feature.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for edge retention in non-ferrous applications\u003c\/li\u003e\n  \u003cli\u003eTiB2 coating reduces friction and resists aluminum adhesion\u003c\/li\u003e\n  \u003cli\u003e35-degree helix angle promotes aggressive chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design permits direct plunge entry\u003c\/li\u003e\n  \u003cli\u003eExtended reach at 2.125 inches for deep pocket and tall-workpiece operations\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute — single end configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in aluminum and non-ferrous workpiece materials (material code N) in CNC machining center applications. Fits any 0.5-inch ID end mill holder, ER collet chuck, or milling chuck on standard vertical or horizontal machining centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes must be performed with the machine spindle fully stopped and the control in a safe state per shop lockout\/tagout procedures. Seat the shank fully into the holder to the recommended gauge line and torque the retention mechanism according to the holder manufacturer's specifications. Inspect the cutting edges and coating for chips or wear before each setup. This tool does not support coolant-through delivery — use external flood or mist coolant directed at the cutting zone for best results in aluminum.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 2.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 35 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiB2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum and Non-Ferrous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00043 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 47E\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 34680\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51736316084530,"sku":"34680","price":252.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/dd0a68defcc3bb7796dd66ccfc59a0f9.jpg?v=1788777187","url":"https:\/\/voomisupply.com\/products\/sgs-34680-square-end-mill-0-5-in-2-flute-solid-carbide-tib2","provider":"Voomi Supply","version":"1.0","type":"link"}