{"product_id":"sgs-34628-square-end-mill-1-inch-2-flute-solid-carbide","title":"Sgs 34628 Square End Mill 1 Inch 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 34628 is a solid carbide square end mill designed for high-precision milling of non-ferrous metals and similar materials. This single-end tool features a 1-inch cutting diameter, a 2-inch length of cut, and a 4-1\/2-inch overall length. The 35-degree helix spiral flute geometry promotes efficient chip evacuation and smooth cutting action. With two flutes and a right-hand cut and right-hand flute orientation, it suits standard CNC and manual milling operations. The centercutting design allows for direct plunge entry without a pre-drilled hole. Machinists and toolroom operators working in job shops, production facilities, and maintenance environments rely on this Series 47 end mill for slotting, profiling, and peripheral milling tasks.\u003c\/p\u003e\u003cp\u003eThe SGS 34628 is intended for use on non-ferrous metals, including aluminum, brass, copper, and similar materials designated under the N workpiece material code. Its uncoated solid carbide construction is well suited for applications where sharp edges and close tolerances are required without the additional heat resistance of a coating. The straight-cylindrical shank with a 1-inch diameter provides secure tool holding in standard ER collets and end mill holders. This is a regular-length tool, making it appropriate for most general-purpose milling setups where extended reach is not required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1-inch cutting diameter with a tight mill diameter tolerance of -0.0001 to -0.0004 inches for close-tolerance work\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction delivers rigidity and wear resistance in non-ferrous milling applications\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge cuts without pre-drilling\u003c\/li\u003e\n\u003cli\u003e35-degree helix angle with spiral flute geometry promotes efficient chip flow\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute orientation for standard spindle use\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical 1-inch shank with tolerance of +0.00000\/-0.00051 inches for consistent tool holding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard CNC machining centers and manual mills with tool holders or collets accepting a 1-inch straight-cylindrical shank. Primary workpiece material compatibility is non-ferrous metals per the N material code designation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer guidelines for tool holding and runout specifications. Ensure the spindle and tool holder are clean and free of debris before seating the shank. Confirm that the collet or end mill holder is rated for the shank diameter and that retention torque is applied per the tool holder manufacturer specification. Always power down and lock out the machine before changing tooling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000\/-0.00051 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 35 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 47\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 34628\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51727353381170,"sku":"34628","price":652.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9c4531413e861fbaa20ad7b1241e5dcd.jpg?v=1788676640","url":"https:\/\/voomisupply.com\/products\/sgs-34628-square-end-mill-1-inch-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}