{"product_id":"sgs-32475-tapered-ball-end-mill-7-degree-3-flute-altin","title":"Sgs 32475 Tapered Ball End Mill 7 Degree 3 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 32475 is a solid carbide tapered ball end mill designed for precision milling in demanding applications. Built on the Series 24 platform, it features a 7-degree taper angle per side and a 0.5-inch length of cut, making it well-suited for profiling, contouring, and 3D machining of deep cavities and mold features. The 3-flute spiral geometry with a 28-degree helix angle promotes efficient chip evacuation while maintaining surface finish quality. An AlTiN coating extends tool life in high-temperature cutting environments. The 1\/4-inch shank diameter and 3-inch overall length allow reach into tight or deep workpiece features where rigidity must be balanced against access.\u003c\/p\u003e\u003cp\u003eThis tapered ball end mill is used in CNC machining centers for mold and die work, aerospace component machining, and precision part production. The micrograin carbide substrate and AlTiN coating make it appropriate for cutting hardened steels, stainless, titanium alloys, cast iron, aluminum, and other non-ferrous and exotic materials. It is a center-cutting tool, allowing plunge entry as well as conventional and climb milling passes.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e7-degree taper angle per side for controlled draft and smooth cavity profiling\u003c\/li\u003e\n\u003cli\u003eBall end geometry with a 0.062-inch nose radius for 3D contour and fillet work\u003c\/li\u003e\n\u003cli\u003e3-flute spiral design with 28-degree helix for balanced chip load and finish quality\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for elevated heat resistance and extended tool life in ferrous and exotic materials\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capability allows direct plunge entry into workpiece material\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with CNC machining centers and milling machines accepting a 1\/4-inch straight shank. Rated for primary workpiece material codes H, K, M, N, P, and S, covering hardened steels, cast iron, stainless steels, non-ferrous metals, low-carbon steels, and high-temperature alloys.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified CNC machinist or toolroom technician. Ensure the machine spindle and tool holder are clean and free of debris before seating the shank. Verify runout at the tool tip after clamping, as excessive runout accelerates wear and reduces surface finish quality. Confirm feed rate, spindle speed, and depth of cut are set per the applicable speeds-and-feeds data for the workpiece material before initiating a cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Shape\u003c\/strong\u003e: Ball\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper Angle Per Side\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 28 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.255 inches (1\/4 inch nominal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 0.062 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00035 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall End Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material Codes\u003c\/strong\u003e: H, K, M, N, P, S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.07 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 32475\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51737985679666,"sku":"32475","price":108.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/405aa333ce0d94955e6c37aed024d81c.jpg?v=1788795459","url":"https:\/\/voomisupply.com\/products\/sgs-32475-tapered-ball-end-mill-7-degree-3-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}