{"product_id":"sgs-32043-square-end-mill-5-8-in-2-flute-solid-carbide","title":"Sgs 32043 Square End Mill 5\/8 in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 32043 is a solid carbide square end mill designed for precision milling of non-ferrous metals and similar materials. With a 0.625-inch mill diameter, 1.625-inch length of cut, and a 3.75-inch overall length, this tool delivers consistent, accurate stock removal in CNC and manual milling applications. The 45-degree helix angle promotes efficient chip evacuation and smooth cutting action. It is centercutting, allowing plunge entry directly into the workpiece. Machinists and tool-and-die professionals working with aluminum, brass, copper, and other non-ferrous alloys are the primary users of this end mill.\u003c\/p\u003e\u003cp\u003eThe SGS 32043 is suited for use in vertical and horizontal machining centers as well as manual knee mills. Its two-flute configuration provides larger chip gullets, making it well matched to gummy non-ferrous materials that require open flute geometry to prevent recutting. The straight cylindrical shank measures 0.625 inches in diameter and seats directly in standard end mill holders, collet chucks, and shrink-fit systems. This is a regular-length tool appropriate for standard-reach applications where extended reach is not required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in non-ferrous milling\u003c\/li\u003e\n\u003cli\u003e45-degree helix angle for efficient chip evacuation and reduced cutting forces\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge entry without a pilot hole\u003c\/li\u003e\n\u003cli\u003eTwo-flute design provides large chip gullets suited to aluminum and other non-ferrous alloys\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand spiral flute configuration for standard spindle rotation\u003c\/li\u003e\n\u003cli\u003eUncoated finish — compatible with coolant flood applications on non-ferrous materials\u003c\/li\u003e\n\u003cli\u003eTight diameter tolerances: +0.00000 \/ -0.00043 inches on both mill and shank diameters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard end mill holders, ER collet chucks, and shrink-fit toolholders accepting a 0.625-inch straight cylindrical shank. Intended for milling non-ferrous metals as specified by primary workpiece material code N per SGS Series 44 tooling designations.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the toolholder manufacturer's clamping torque guidelines. Ensure the spindle is fully stopped and the machine is powered down or in an E-stop state before changing tooling. Verify runout at the tool tip after seating in the holder, as carbide end mills are sensitive to excessive TIR. Do not use this uncoated end mill on ferrous materials, as carbide without an appropriate coating is susceptible to accelerated wear on steel and cast iron.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.625 inches (1-5\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.75 inches (3-3\/4 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00043 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00043 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 32043\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51746301509938,"sku":"32043","price":432.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fce322e1e36298a165d62c912a1422b1.jpg?v=1788868122","url":"https:\/\/voomisupply.com\/products\/sgs-32043-square-end-mill-5-8-in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}