{"product_id":"sgs-31431-square-end-mill-9-32-inch-4-flute-solid-carbide","title":"Sgs 31431 Square End Mill 9\/32 Inch 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 31431 is a solid carbide square end mill designed for precision milling operations in a wide range of ferrous and non-ferrous materials. It features a 9\/32 inch (0.2813 inch) cutting diameter, a 1\/2 inch length of cut, and a 5\/16 inch straight-cylindrical shank. Overall length is 2-1\/2 inches, placing it in the stub length category. The four-flute, spiral design with a 30-degree helix angle supports efficient chip evacuation and smooth surface finishes. Micrograin carbide construction delivers hardness and edge retention that high-speed steel tooling cannot match. This is an uncoated, centercutting end mill capable of both peripheral and plunge cuts.\u003c\/p\u003e\u003cp\u003eThe SGS 31431 is suited for milling slots, pockets, profiling, and contour work on CNC machining centers and manual mills. Its stub length geometry reduces deflection in tight setups where a standard-length end mill would flex under load. Right-hand cut and right-hand flute orientation are standard for conventional spindle configurations. The Series 14 classification designates it as a general-purpose double-end design within the SGS lineup, making it a practical choice for job shops, tool rooms, and production environments handling a variety of workpiece materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid micrograin carbide construction for superior hardness and edge retention\u003c\/li\u003e\n\u003cli\u003e4-flute spiral design with 30-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge entry into workpiece\u003c\/li\u003e\n\u003cli\u003eStub length (2-1\/2 inch OAL) minimizes deflection in tight setups\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute for standard spindle operation\u003c\/li\u003e\n\u003cli\u003eUncoated finish suitable for use across multiple primary workpiece material classes\u003c\/li\u003e\n\u003cli\u003eMill diameter tolerance of +0.000 \/ -0.002 inches ensures consistent fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eRated for use across primary workpiece material codes H, K, M, N, P, and S, covering hardened materials, cast irons, stainless steels, non-ferrous metals, steel, and heat-resistant superalloys. Designed as an OEM-style cutting tool compatible with standard straight-bore end mill holders and collet chucks accepting a 5\/16 inch shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a machinist or CNC setup technician. Secure the 5\/16 inch shank in a properly sized collet or end mill holder, ensuring adequate tool stick-out is minimized to reduce vibration and deflection. Verify spindle speed and feed rate are appropriate for the workpiece material and cut depth before engaging the tool. Inspect the cutting edges for chips or wear before each use, as carbide tools can fail suddenly if run with damaged flutes.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 9\/32 inch (0.2813 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/16 inch (0.3125 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 31431\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51755401773362,"sku":"31431","price":87.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c9c6d058e7feeb1ce31abd0016f07883.jpg?v=1788954611","url":"https:\/\/voomisupply.com\/products\/sgs-31431-square-end-mill-9-32-inch-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}