{"product_id":"sgs-31411-square-end-mill-7-64-in-4-flute-solid-carbide","title":"Sgs 31411 Square End Mill 7\/64 in 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 31411 is a double-end, four-flute square end mill ground from solid micrograin carbide. It carries a 7\/64 inch (0.1094 inch) cutting diameter with a 3\/16 inch (0.1875 inch) length of cut and a 1\/8 inch straight-cylindrical shank. The 30-degree right-hand spiral flute geometry promotes efficient chip evacuation and stable cutting action across a broad range of workpiece materials. At 1-1\/2 inches overall length, this stub-length tool is well suited to close-tolerance milling operations where overhang and deflection must be kept to a minimum. The bright, uncoated finish is appropriate for applications where coating chemistry is not required or where regrinding is anticipated.\u003c\/p\u003e\n\u003cp\u003eThis end mill is rated for use across multiple material categories, including cast iron, non-ferrous metals, stainless steel, steel, and high-temperature alloys, as indicated by primary workpiece material codes H, K, M, N, P, and S. The double-end configuration doubles available cutting edges per tool, reducing per-edge tooling cost in production or job-shop environments. Typical applications include slotting, profiling, and side milling on CNC machining centers and manual knee mills where a small-diameter, short-reach tool is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for hardness and wear resistance at small diameters\u003c\/li\u003e\n  \u003cli\u003eDouble-end design provides two usable cutting ends per tool\u003c\/li\u003e\n  \u003cli\u003e30-degree right-hand helix angle for efficient chip flow and reduced cutting forces\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting capability allows direct plunge entry into workpiece material\u003c\/li\u003e\n  \u003cli\u003eStub length minimizes deflection during tight-tolerance profiling and slotting\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish compatible with a wide range of cutting fluids and materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on CNC machining centers and manual milling machines accepting a 1\/8 inch straight-cylindrical shank. Rated for workpiece materials in categories H, K, M, N, P, and S per SGS Series 14 classification, covering cast iron, non-ferrous metals, stainless steel, general steel, and high-temperature alloys.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician using an appropriate collet or end mill holder sized for a 1\/8 inch shank. Verify that the holder is clean and free of debris before seating the tool, and torque the collet nut to the holder manufacturer's specification. Confirm spindle direction is set to right-hand rotation before engaging the cut. Observe all applicable shop safety protocols, including guarding and personal protective equipment, when operating rotating cutting tools.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 7\/64 inch (0.1094 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin Grade\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/16 inch (0.1875 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-1\/2 inches (1.5000 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.1250 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Configuration\u003c\/strong\u003e: Double End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Bright, Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material Codes\u003c\/strong\u003e: H, K, M, N, P, S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 31411\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51748838342962,"sku":"31411","price":45.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/83096043320e31b9e97ca3277796047f.jpg?v=1788899308","url":"https:\/\/voomisupply.com\/products\/sgs-31411-square-end-mill-7-64-in-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}